Lenze 00459635 E82ZN30334B230 Mains Filter – 8200 Vector Series
Het item werd toegevoegd aan uw offerteaanvraag
Product Information
The Lenze 00459635, designated by model number E82ZN30334B230, is a 3-phase mains filter designed for radio frequency interference (RFI) suppression in industrial automation equipment. As part of the Lenze 8200 vector accessories family, this electromagnetic compatibility (EMC) filter dampens high-frequency line-conducted noise generated by variable frequency drives before it feeds back into the local power grid. Built to satisfy international directives EN 61800-3 and EN 55011, the unit operates across 3-phase power supplies rated at 400 V AC to 480 V AC at 48 Hz to 62 Hz. The compact IP20 housing delivers a continuous throughput current of 30 A at 50°C ambient operating temperature, with an elevated capacity of 34 A in 40°C environments.
Wiring connections are established using heavy-duty, finger-safe screw terminals labeled for phase conductors L1, L2, and L3, alongside a protective earth (PE) terminal. Mechanical installation inside the control cabinet is versatile, supporting direct footprint sub-assembly mounting beneath a Lenze 8200 vector frequency inverter to save enclosure space, as well as conventional adjacent side-by-side mounting. Because mains filters are passive hardware devices, replacing a damaged filter requires matching current capacity, voltage levels, and physical mounting geometry rather than loading parameter sets or software. Sourcing a ready spare through ABC Industrial Parts helps maintenance teams minimize installation time and avoid modifications to control cabinet wiring layout.
Because the filter contains passive power components, operational verification relies on routine electrical measurements during maintenance or troubleshooting. Technicians should verify that line voltages remain within 400 V AC to 480 V AC, confirm phase balance, and ensure phase load currents do not exceed the 30 A or 34 A thermal limits based on ambient enclosure temperature. Inspecting terminal screw torque and ensuring low-impedance PE grounding are vital first-line checks, as grounding defects degrade RFI attenuation performance and introduce safety hazards. Internal insulation failure or electrical breakdown within the unit is not field-serviceable, making direct replacement with a tested unit from ABC Industrial Parts the fastest route to restore full EMC compliance.
Technical Specifications
| Manufacturer | Lenze |
| Part Number | 00459635 |
| Model / Type | E82ZN30334B230 |
| Component Type | Mains Filter / EMC Filter |
| Product Family | 8200 Vector Accessories |
| Rated Operating Voltage | 3x 400 / 480 V AC |
| Supply Frequency | 48 - 62 Hz |
| Phases | 3 |
| Rated Current (50°C Ambient) | 30 A |
| Rated Current (40°C Ambient) | 34 A |
| Ingress Protection Rating | IP20 |
| Connection Type | Screw terminals (L1, L2, L3, PE) |
| EMC Standard Compliance | EN 61800-3, EN 55011 |
Replacement and Spare Part Considerations
When substituting or replacing a Lenze 00459635 filter in an existing control cabinet, technicians must verify that the replacement unit matches the E82ZN30334B230 rating. Essential requirements include the 3-phase 400 V to 480 V AC voltage range and continuous current capabilities of 30 A at 50°C ambient or 34 A at 40°C ambient. Using a lower-rated filter in high-demand packaging, conveyor, or textile machinery applications risks thermal overload and nuisance tripping.
Physical mounting layout is another important factor during replacement. If the original cabinet design uses sub-assembly footprint mounting directly beneath a Lenze 8200 vector frequency inverter, ensure the replacement unit utilizes matching mounting points. For side-by-side enclosure layouts, confirm panel depth and adequate wire bending radius for heavy-duty power lines connected to terminals L1, L2, L3, and PE.
Frequently Asked Questions
Which drive series is the Lenze 00459635 mains filter designed for?
The 00459635 (model E82ZN30334B230) mains filter is designed specifically for use with Lenze 8200 vector series frequency inverters operating on 3-phase 400 V / 480 V AC mains lines.
What are the primary electrical supply ratings for the E82ZN30334B230 filter?
It operates on 3-phase supply voltages from 400 V AC to 480 V AC at 48 Hz to 62 Hz. Continuous rated current is 30 A in 50°C ambient environments and 34 A in 40°C environments.
What standards compliance does this Lenze mains filter provide?
The filter suppresses radio frequency interference (RFI) to help drive systems comply with international electromagnetic compatibility (EMC) standards EN 61800-3 and EN 55011.
How is the Lenze 00459635 mounted inside an electrical enclosure?
It supports two mounting methods: footprint sub-assembly mounting directly beneath the Lenze 8200 vector drive to save cabinet space, or standard side-by-side mounting on the panel backplate.
What connections are used for wiring the E82ZN30334B230 mains filter?
Power lines are connected via IP20 finger-safe screw terminals designated for phase conductors L1, L2, L3, and protective earth PE.
Take advantage of our exchange formula
A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.
Play it safe with our warranty conditions
Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.
Data backup and recovery
Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.
Specific firmware and hardware versions
If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.
Disclaimer:
We are not an authorised distributor of Lenze.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.