Lenze 00394820 EMF2102IB-V003 INTERBUS Module
Het item werd toegevoegd aan uw offerteaanvraag
Product Information
The Lenze 00394820 (EMF2102IB-V003) is an INTERBUS fieldbus communication module designed for integration into Lenze 8200 vector frequency inverters and Lenze 9300 series servo drives. Installed directly into the host drive's built-in Front Automation Interface (FIF) slot, this function module connects the drive system to central INTERBUS master controllers without requiring external gateways or panel wiring. Operating at a standard fieldbus transmission speed of 500 kbps, the unit provides reliable cyclic real-time data exchange for automated packaging, material handling, textile, and general manufacturing applications.
Physical fieldbus wiring relies on dual 9-pin Sub-D connectors on the front panel—a female connector for incoming remote bus lines and a male connector for outgoing remote bus connections—supporting a daisy-chained line network topology using RS-485 differential signals. Commissioning a replacement EMF2102IB-V003 module involves seating the card into the FIF slot and establishing fieldbus addressing using onboard hardware DIP switches or configuration parameters retained in the host drive's non-volatile EEPROM. Engineering setup, diagnostics, and parameter management can be managed through Lenze Global Drive Control (GDC) software or central INTERBUS CMD master tools, with technical support available from ABC Industrial Parts for unit verification and spare preparation.
Front-panel status monitoring is provided by four diagnostic LEDs: UL for logic supply voltage, CC for remote bus cable checks, BA for active bus data transmission, and RD to indicate remote bus disable or fault conditions. When communication issues arise, the host drive registers trip codes on its keypad display, including CE0 for automation interface faults, CE1 for process data timeouts, CE2 for parameter communication errors, and CE3 for hardware faults. Initial troubleshooting should start by inspecting physical Sub-D connections, shield grounding, bus cable integrity, and module seating in the FIF slot. If internal hardware failures or EEPROM corruption trigger persistent CE0 or CE3 errors, field repairs are generally not practical, and replacing the module or sourcing a tested exchange unit through ABC Industrial Parts is recommended to restore system operation.
Technical Specifications
| Manufacturer | Lenze |
| Part Number | 00394820 |
| Model / Type | EMF2102IB-V003 |
| Component Type | Communication Module |
| Product Family Compatibility | Lenze 8200 vector / 9300 |
| Fieldbus Protocol | INTERBUS |
| Transmission Rate | 500 kbps |
| Input Interface | 9-pin Sub-D Female (Remote Bus In) |
| Output Interface | 9-pin Sub-D Male (Remote Bus Out) |
| Mounting Type | Plug-in Automation Interface Slot (FIF) |
Programming and Configuration
The Lenze EMF2102IB-V003 communication module utilizes non-volatile configuration storage hosted within the drive's EEPROM alongside hardware DIP switches on the module itself. Fieldbus node addresses and operational parameters can be set directly via DIP switches or assigned digitally during system integration.
Software engineering and register adjustments are performed using Lenze Global Drive Control (GDC) software or the INTERBUS CMD master diagnostic tool. These software tools allow commissioning technicians to monitor process data registers, adjust communication parameters, and verify drive status across the INTERBUS network.
Communication and System Integration
Featuring dual 9-pin Sub-D connectors, the EMF2102IB-V003 module is designed to build line-topology INTERBUS networks. The 9-pin female Sub-D port accepts incoming remote bus lines, while the 9-pin male Sub-D port forwards signals along the daisy-chained fieldbus segment using RS-485 differential signal lines.
Operating at a fixed transmission speed of 500 kbps, the module supports high-speed cyclic data exchange for motor speed commands, status feedback, and parameter transfer. Direct slot insertion into the host drive minimizes control cabinet space requirements while providing high noise immunity across industrial automation installations.
Diagnostics and Status Indication
Real-time diagnostic evaluation is accessible directly on the module's front panel through four dedicated LED indicators: UL (User Logic supply voltage), CC (Cable Check connection status), BA (Bus Active data transmission), and RD (Remote Bus Disabled segment fault). These indicators allow maintenance technicians to isolate network, cable, or power issues without opening drive parameter menus.
In addition to visual LED indications, detailed fieldbus diagnostic data can be retrieved via drive keypad display trip codes (CE0–CE3) or read directly through Lenze Global Drive Control (GDC) software registers and central INTERBUS master CMD tools.
Status LED Indicators
| LED | Color/Status | Meaning |
|---|---|---|
| UL | Green - Solid Green when operational / Off on fault | User Logic / Module Supply Voltage OK when lit green. Off indicates missing supply voltage from host drive or internal board hardware failure. |
| CC | Green - Solid Green when connected | Cable Check / Remote Bus cable connection established. Green when incoming bus cable is physically connected and properly terminated. |
| BA | Green - Solid Green when active | Bus Active / INTERBUS data transmission active. Green when cyclic communication with INTERBUS master is operational. |
| RD | On when disabled or faulted | Remote Bus Disabled / Bus segment disconnected or fault present on outgoing remote bus segment. |
Replacement and Spare Part Considerations
When replacing an existing EMF2102IB-V003 module in a Lenze 8200 vector inverter or 9300 servo drive, confirm that the replacement card is fully seated into the host drive's Front Automation Interface (FIF) slot with power isolated. Ensure the contacts on the plug-in connector are clean and free of contamination or damage.
Before powering up the replacement card, verify that all hardware DIP switch settings match the original module's configuration to maintain proper INTERBUS fieldbus node addressing. Because drive parameter and fieldbus settings are retained in the host drive's EEPROM or restored via GDC software, matching hardware settings enables fast swap-out and minimizes machine downtime.
Error Codes & Fault Codes
The following error codes may be displayed during operation or diagnostics:
| Code | Name | Description | Possible Cause | Recommended Action |
|---|---|---|---|---|
| CE0 | Communication Error 0 / Automation Interface Fault | Communication breakdown between host drive and function module (EMF2102IB) via FIF interface. | Module improperly seated, module defect, internal drive communication timeout, intense electromagnetic interference. | Check module seating in drive FIF slot. Inspect module contacts. If error persists after re-seating and power cycle, replace EMF2102IB module. |
| CE1 | Communication Error 1 / Process Data Monitoring Time Out | Interbus process data transmission timeout exceeded. | Interbus cable broken, master PLC in STOP mode, wrong baud rate, bus interference, disconnected bus cable. | Check Interbus cabling, connector contacts, shield connection, and master controller run state. |
| CE2 | Communication Error 2 / Fieldbus Timeout | Management / Parameter data communication error or frame corruption on INTERBUS. | Faulty shielding, incorrect termination, noisy signal line. | Verify cable shield grounding, inspect Sub-D connectors, replace cable if damaged. |
| CE3 | Communication Error 3 / Module Hardware Failure | Internal hardware failure detected on the EMF2102IB communication module. | Hardware component breakdown or EEPROM corrupted on the communication card. | Internal hardware fault — replace the EMF2102IB module. |
Frequently Asked Questions
How is the Lenze EMF2102IB-V003 module installed in a drive?
The module plugs directly into the built-in Front Automation Interface (FIF) slot on Lenze 8200 vector inverters and 9300 servo drives without requiring external gateways or panel wiring.
What transmission speed does the EMF2102IB-V003 INTERBUS module support?
The module operates at a standard INTERBUS transmission rate of 500 kbps using RS-485 differential signals.
What do trip codes CE0 and CE3 indicate on the host drive display?
Trip code CE0 indicates a communication fault between the host drive and module via the FIF slot (often caused by improper seating), while CE3 indicates an internal hardware breakdown or corrupted EEPROM on the EMF2102IB module.
How are fieldbus node addresses configured on the EMF2102IB-V003 module?
Node addressing and fieldbus settings are configured using onboard hardware DIP switches or assigned via drive parameters stored in the host drive's non-volatile EEPROM.
What physical connectors are used for fieldbus networking?
The module features two 9-pin Sub-D connectors: a female 9-pin Sub-D port for incoming remote bus lines and a male 9-pin Sub-D port for outgoing remote bus connections.
Take advantage of our exchange formula
A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.
Play it safe with our warranty conditions
Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.
Data backup and recovery
Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.
Specific firmware and hardware versions
If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.
Disclaimer:
We are not an authorised distributor of Lenze.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.