Lenze E94AYFLF Digital Frequency Module DF IN/OUT
Het item werd toegevoegd aan uw offerteaanvraag
Product Information
The Lenze E94AYFLF Digital Frequency Module DF IN/OUT is an extension card within the Lenze Servo Drives 9400 product family designed for master frequency evaluation and multi-axis synchronization. Engineered for installation in Lenze 9400 HighLine, Multi Drive, and Single Drive controllers, this digital frequency input and output module interfaces master incremental encoders, pulse generators, and registration sensors with the drive system. Operating with RS422, TTL, and HTL incremental encoder signal levels at maximum input frequencies up to 500 kHz, the E94AYFLF provides precision motion feedback processing across packaging, printing, paper converting, textile, and material handling applications.
Hardware connection is handled through dual Sub-D connectors on the module front panel, providing dedicated interfaces for the Digital Frequency Input (DF IN) and Digital Frequency Output (DF OUT) channels. The option card mounts directly into option slot MX or slot M on the 9400 servo drive chassis. When commissioning a replacement module, system parameters, pin assignments, and encoder resolutions must be aligned within the drive application project using the Lenze L-force Engineer software workspace. Because project settings and configuration parameters are maintained on the central memory module (MMK) of the 9400 drive controller, swapping a spare unit is straightforward, though correct configuration verification remains vital. ABC Industrial Parts can assist maintenance teams with spare module sourcing and parameter management to ensure continuous operation.
Diagnostic feedback on module state is provided by front-panel Status LEDs that indicate active communication and signal activity across the DF IN and DF OUT channels. System diagnostic information is accessible through the Lenze L-force Engineer diagnostic workspace, the 9400 Drive Operator Panel diagnostic menu, and internal drive parameters that display digital frequency input values and encoder emulation output states. The system fault buffer also tracks module detection status in option slot MX/M. Initial checks should verify secure seating in slot MX/M, solid Sub-D cable seating, and valid signal pulses from connected encoders. If signal processing or hardware interface faults persist after checking connections, internal component issues may require replacing the card or securing a tested replacement unit through ABC Industrial Parts.
Technical Specifications
| Manufacturer | Lenze |
| Part Number | E94AYFLF |
| Model / Type | Digital Frequency Module DF IN/OUT |
| Product Family | Servo Drives 9400 |
| Component Type | Digital Frequency Input/Output Extension Module |
| Input Signal Type | RS422 / TTL / HTL incremental encoder signal |
| Output Signal Type | RS422 / TTL encoder emulation |
| Maximum Input Frequency | 500 kHz |
| Connector Type | Sub-D (DF IN and DF OUT) |
| Mounting Location | Option slot MX/M on 9400 Servo Drive |
| Lifecycle Status | Phase Out |
Programming and Configuration
Configuring the Lenze E94AYFLF module is managed within the Lenze L-force Engineer software workspace. The software provides an integrated environment to define input encoder signal parameters, pin configurations, encoder emulation ratios, and resolution settings required for precise master-slave drive coordination.
All operational parameters and scaling factors configured for slot MX or M are stored centrally in the memory module (MMK) of the host Lenze 9400 Servo Drive. This centralized storage structure helps preserve module configuration during hardware swaps, provided the memory module contents are verified during maintenance.
Communication and System Integration
The Lenze E94AYFLF features dual Sub-D physical interfaces designated for DF IN and DF OUT signal lines. The DF IN port accepts incremental encoder signals operating under RS422, TTL, or HTL standards at frequencies up to 500 kHz, allowing integration with external master encoders, register sensors, or pulse generators.
The DF OUT port provides RS422 and TTL encoder emulation outputs, enabling the 9400 servo drive to output speed and position frequency signals to downstream slave drives. This physical passthrough architecture supports cascading multi-axis drive synchronization and electronic line-shaft topologies across complex machinery.
Diagnostics and Status Indication
Monitoring the E94AYFLF digital frequency module involves physical indicators and drive-level software diagnostics. The host 9400 drive's fault buffer tracks module recognition in slot MX or slot M, while diagnostic parameters monitor the incoming DF IN pulse counts and DF OUT encoder emulation states. Maintenance personnel can inspect signal feedback through the 9400 Drive Operator Panel menu or directly within the L-force Engineer diagnostic workspace.
Status LED Indicators
| LED | Color/Status | Meaning |
|---|---|---|
| Status LEDs | Active | Indicates active communication/signal state on DF IN and DF OUT channels. |
Replacement and Spare Part Considerations
When replacing an existing Lenze E94AYFLF extension module, ensure the replacement unit is correctly fitted into option slot MX or M on the Lenze 9400 Servo Drive chassis. Because the unit has entered phase-out status, planning spare unit availability is essential for maintaining production continuity in electronic line-shaft and synchronized multi-axis systems.
Before putting a spare module into service, verify that cable connections to the DF IN and DF OUT Sub-D connectors match the original wiring scheme. Parameter configuration stored on the drive's memory module (MMK) should be checked via L-force Engineer to confirm signal levels (RS422, TTL, or HTL) and frequency settings align with connected master encoders and slave drives.
Frequently Asked Questions
What is the main function of the Lenze E94AYFLF digital frequency module?
The E94AYFLF provides digital frequency input and output expansion for Lenze 9400 Servo Drives, allowing drives to accept master encoder signals (RS422, TTL, HTL up to 500 kHz) and emit encoder emulation signals (RS422, TTL) for multi-axis drive synchronization.
Which drives are compatible with the Lenze E94AYFLF module?
The module is compatible with Lenze Servo Drives 9400 series, including 9400 HighLine, Multi Drive, and Single Drive controllers, installed in option slot MX or M.
How is the E94AYFLF module configured?
Configuration is performed using the Lenze L-force Engineer software workspace, where input signal types, encoder resolutions, and output emulation settings are configured and saved to the drive's memory module (MMK).
What connectors are used for DF IN and DF OUT signals on the E94AYFLF?
The module uses standard Sub-D connectors on its front panel for both the Digital Frequency Input (DF IN) and Digital Frequency Output (DF OUT) signal channels.
What diagnostic tools are available for troubleshooting the E94AYFLF?
Diagnostics include front-panel Status LEDs indicating active signal states, parameter monitoring via the 9400 Drive Operator Panel, and real-time status monitoring in the L-force Engineer diagnostic workspace.
Take advantage of our exchange formula
A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.
Play it safe with our warranty conditions
Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.
Data backup and recovery
Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.
Specific firmware and hardware versions
If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.
Disclaimer:
We are not an authorised distributor of Lenze.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.