Lenze E94AYM33 MM330 Memory Module – 9400 Servo Drives
Het item werd toegevoegd aan uw offerteaanvraag
Product Information
The Lenze E94AYM33 MM330 Memory Module is a non-volatile flash memory storage component designed for the Lenze 9400 Servo Drives family, including HighLine and StateLine single drive controllers. Installed directly into the internal memory card slot via an integrated edge connector, this drive memory module provides 32 MB of battery-free storage. It holds essential operational data including complete drive parameter sets, user application software, system firmware revisions, and safety module configurations. By storing configuration data onboard the drive peripheral rather than relying on external batteries, the unit ensures long-term data preservation across packaging, material handling, textile, and automotive assembly machinery.
Commissioning a replacement servo drive or restoring an existing unit is simplified by transferring the physical E94AYM33 memory card between drives. When plugged into a replacement Lenze 9400 drive controller, the memory module automatically transfers parameter sets, firmware, motion profiles, and safety data upon power-up, eliminating the need for a laptop or software connections during field swapping. For initial parameter setup, routine system updates, or offline data backups, the card integrates directly with Lenze Engineer software. Maintenance teams sourcing replacement units through ABC Industrial Parts can pre-configure hardware or transfer stored parameters quickly to minimize operational downtime.
System health and memory module integration are monitored continuously by the host 9400 drive controller. Operational status and fault conditions are communicated through the Lenze 9400 keypad diagnostic display, remotely via Lenze Engineer software, or across fieldbus parameter networks. Diagnostic codes indicate specific module events such as an unseated module, checksum corruption, or firmware incompatibility between the memory card and host drive revision. First-line troubleshooting involves isolating power, checking physical edge connector contacts, ensuring the module is properly seated, and validating software compatibility. If physical flash corruption or hardware failure occurs on the memory board, replacing the unit or obtaining a tested exchange module through ABC Industrial Parts provides a fast path back to full production.
Technical Specifications
| Manufacturer | Lenze |
| Part Number | E94AYM33 |
| Model / Type | MM330 Memory Module |
| Alternate Part Numbers | MM330, 00539133 |
| Component Type | Drive Memory Module |
| Product Family | 9400 Servo Drives |
| Memory Capacity | 32 MB |
| Memory Type | Flash Memory |
| Configuration Retention | Non-Volatile |
| Interface Connector | Edge Connector / Internal Module Slot |
Programming and Configuration
The Lenze E94AYM33 memory module operates alongside Lenze Engineer software to store and restore system programs, motion profiles, and parameter configurations across Lenze 9400 series servo drives. With 32 MB of non-volatile flash memory, the card retains complex multi-axis motion data, custom application logic, and safety module parameters without requiring battery backup power.
During commissioning or maintenance routines, engineers can write complete parameter files and application code directly to the E94AYM33 module using Lenze Engineer software. Once loaded, the module operates independently within the drive chassis, enabling automated loading of parameter sets and safety configurations whenever the drive powers up.
Communication and System Integration
The E94AYM33 module interfaces with Lenze 9400 HighLine and StateLine drive controllers through an internal module slot featuring an integrated edge connector. This direct hardware link allows the drive controller CPU to access stored firmware, safety parameters, and application code at full operating speeds.
System monitoring is further supported through fieldbus parameter access. Networked automation systems can remotely inspect memory module status, verify program integrity, and monitor data transfer processes without interrupting drive operations.
Diagnostics and Status Indication
Diagnostic monitoring for the E94AYM33 memory module is managed directly through the host Lenze 9400 servo drive. System error and fault code logs are displayed on the optional Lenze 9400 keypad diagnostic display, providing immediate local status feedback to field technicians.
In addition to local keypad indications, remote diagnostic verification is accessible using Lenze Engineer software or through higher-level fieldbus control networks. These diagnostic pathways allow operators to assess module detection, read active fault logs, and verify parameter compatibility across the installation.
Replacement and Spare Part Considerations
Replacing a faulty servo drive with the E94AYM33 memory module installed allows maintenance personnel to execute rapid, PC-free drive swaps. Transferring the module from a damaged drive to a spare unit transfers all stored parameters, firmware, and user programs without requiring an external engineering tool.
When installing or swapping memory modules, care must be taken to match drive controller hardware revisions with the firmware stored on the card. Hardware mismatches will trigger diagnostic faults preventing drive operation until software updates are applied using Lenze Engineer.
Before re-powering the drive system, confirm that the E94AYM33 module is fully seated into the internal card slot with clean, undamaged edge contacts to prevent data corruption during initial boot routines.
Error Codes & Fault Codes
The following error codes may be displayed during operation or diagnostics:
| Code | Name | Description | Possible Cause | Recommended Action |
|---|---|---|---|---|
| 0x00710001 | Memory module missing | The drive controller detected that no memory module is plugged into the slot. | Memory module E94AYM33 is not inserted, not fully seated, or contact pins are damaged. | Power down the drive, reinsert or properly seat the memory module, and reapply power. If problem persists, check slot hardware. |
| 0x00710002 | Memory module data invalid | Data structure or checksum on the memory module is corrupted or unreadable. | Power failure during write operation, incompatible data format, or physical flash memory corruption. | Re-download application program and parameter set using Lenze Engineer software. Replace E94AYM33 module if memory write fails. |
| 0x00710003 | Incompatible memory module firmware | Firmware contained on the memory module does not match or is incompatible with the drive controller hardware revision. | Memory module swapped from a drive with a different hardware revision or unsupported firmware version. | Update drive system software or re-commission using Lenze Engineer matching the target controller hardware. |
Frequently Asked Questions
What drive models are compatible with the Lenze E94AYM33 memory module?
The E94AYM33 (MM330) memory module is compatible with Lenze 9400 HighLine and Lenze 9400 StateLine servo drives.
Does the E94AYM33 memory card require a battery to retain drive parameters?
No, the module uses 32 MB of non-volatile flash memory, which maintains stored parameter sets, firmware, and user programs without battery power.
Is engineering software required when replacing a Lenze 9400 drive using this module?
No software or PC connection is required for routine swaps. Transferring the physical E94AYM33 memory module to a replacement drive automatically loads stored parameters and firmware upon power-up.
Which software is used for initial programming and offline parameter backup on the E94AYM33?
Lenze Engineer software is used to download application programs, configure motion parameters, perform updates, and manage memory backups.
What causes fault code 0x00710001 on a Lenze 9400 drive?
Fault code 0x00710001 indicates that the drive controller does not detect a memory module. This occurs if the E94AYM33 card is missing, improperly seated in the slot, or has damaged contact pins.
Take advantage of our exchange formula
A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.
Play it safe with our warranty conditions
Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.
Data backup and recovery
Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.
Specific firmware and hardware versions
If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.
Disclaimer:
We are not an authorised distributor of Lenze.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.