Siemens 6SL3130-7TE25-5AA3 SINAMICS S120 Active Line Module 55kW
Het item werd toegevoegd aan uw offerteaanvraag
Product Information
The Siemens 6SL3130-7TE25-5AA3 is a 55 kW SINAMICS S120 Active Line Module designed to supply stabilized DC power to multi-axis drive configurations. Operating on a 3-phase line input of 380 V to 480 V AC at 47 to 63 Hz, this self-commutated infeed unit outputs a regulated 600 V DC link voltage with a rated current of 92 A. Built in a space-saving Booksize frame measuring 200 mm wide, 380 mm high, and 270 mm deep, it utilizes internal air cooling with low noise generation at 60 dB sound pressure and features an IP20 protection rating. Its regenerative feedback capability directs braking energy from attached motors back into the power grid, optimizing overall energy efficiency in demanding industrial setups across automotive manufacturing, packaging machinery, machine tools, and material handling systems.
Physical integration is accomplished via dedicated M8 screw stud terminals for the 3-phase line input, an M6 screw terminal for protective earth grounding, integrated 24 V DC auxiliary busbars, and an X21 connector for digital input signals. Integrated DRIVE-CLiQ communication ports enable high-speed digital transmission of component parameters directly to a central control unit, such as a CU320-2. Commissioning a replacement spare requires transferring system topology settings using Siemens STARTER or SINAMICS Startdrive engineering tools. While the DRIVE-CLiQ connection allows automatic hardware recognition, aligning firmware levels and project parameters remains a vital step before powering up the drive array, where technical support from ABC Industrial Parts can assist in preparing and verifying spare hardware configurations.
Operational monitoring is provided by a multi-state READY / DC LINK / FAULT LED indicator located on the front panel, which signals operating readiness, DC link charging status, or hardware fault states through solid or flashing green and red light patterns. A solid or flashing red state indicates internal hardware failures or critical trips that require immediate investigation. Comprehensive diagnostics are accessible through the central Control Unit fault buffer, DRIVE-CLiQ bus diagnostics, or web server interfaces via STARTER and Startdrive. When internal hardware components or power circuits fail, board-level repairs cannot be serviced in the field; replacing the unit with a tested spare or opting for repair through ABC Industrial Parts provides a safe and effective pathway to resume production.
Technical Specifications
| Supply Voltage Range | 380 - 480 V AC |
| Line Frequency | 47 - 63 Hz |
| Output Voltage | 600 V DC |
| Rated Current | 92 A |
| Rated Active Power | 55 kW |
| Power Loss | 0.95 kW |
| Format | Booksize |
| Dimensions (W x H x D) | 200 mm x 380 mm x 270 mm |
| Ingress Protection | IP20 |
| Cooling Type | Internal Air Cooling |
| Sound Pressure Level | 60 dB |
| Operating Temperature | 0 - 40 °C |
| Communication Protocol | DRIVE-CLiQ |
Programming and Configuration
The 6SL3130-7TE25-5AA3 Active Line Module is configured and integrated within the SINAMICS S120 ecosystem using Siemens STARTER or SINAMICS Startdrive software tools. The unit contains an electronic rating plate transmitted automatically over the DRIVE-CLiQ interface to the central controller, ensuring correct device parameterization without manual entry of rating data.
When replacing an existing unit, the central CU320-2 Control Unit compares the stored system topology against the connected physical hardware. If firmware revisions or hardware parameters differ, project updates via STARTER or Startdrive may be necessary to ensure seamless integration and avoid topology mismatch faults during startup.
Communication and System Integration
System integration relies on the integrated DRIVE-CLiQ digital interface ports. DRIVE-CLiQ cables link the Active Line Module to adjacent SINAMICS S120 Motor Modules and the central CU320-2 Control Unit, transferring control commands, status information, and diagnostic details over a single high-speed bus network.
Power and auxiliary interfaces include M8 screw stud terminals for line connection, an M6 screw for protective earth grounding, integrated 24 V DC busbars for auxiliary control power distribution, and the X21 terminal block for digital input connections. Unused DRIVE-CLiQ sockets must be sealed with blanking plugs to maintain noise immunity and system integrity.
Diagnostics and Status Indication
The module features a combined READY / DC LINK / FAULT LED indicator on its front panel. Green states confirm operational readiness and normal DC link voltage status, while solid or flashing red states highlight hardware trips, overvoltage conditions, or internal faults.
Advanced diagnostic data is available through the central Control Unit diagnostic buffer. Engineers and maintenance personnel can evaluate fault codes, operational logs, and real-time DC link parameters using STARTER, SINAMICS Startdrive, or the web server diagnostic interface of the CU320-2 Control Unit.
Status LED Indicators
| LED | Color/Status | Meaning |
|---|---|---|
| READY / DC LINK / FAULT | Red / Green - Solid or Flashing Red / Green | Module status indicator showing operational readiness, DC link charging status, or hardware fault conditions. Red or flashing red state indicates internal hardware fault or trip requiring investigation or unit replacement. |
Replacement and Spare Part Considerations
When swapping a faulty 6SL3130-7TE25-5AA3 module, physical frame size (Booksize 200 mm width) and power ratings (55 kW active power, 92 A DC output) must strictly match the existing installation. Verifying line voltage inputs (380-480 V AC) and ensuring proper cooling clearance within the cabinet are essential before installation.
During spare replacement, connect line power using M8 screw studs, earth grounding via the M6 point, 24 V busbar jumpers, and DRIVE-CLiQ cabling. Once connected, topology validation must be confirmed through the central Control Unit to ensure drive parameters and runtime software align with the replacement hardware.
Frequently Asked Questions
What is the function of the Siemens 6SL3130-7TE25-5AA3 Active Line Module?
The 6SL3130-7TE25-5AA3 acts as a regulated 55 kW power supply unit in SINAMICS S120 multi-axis drive systems. It converts 380 V to 480 V AC line power into a controlled 600 V DC link output (92 A) and feeds braking energy back into the grid.
What software is used to commission and configure the 6SL3130-7TE25-5AA3?
The module is configured using Siemens STARTER or SINAMICS Startdrive engineering software via a central CU320-2 Control Unit.
How does DRIVE-CLiQ simplify replacement of this line module?
DRIVE-CLiQ automatically transmits the component's electronic rating plate and identification data to the central Control Unit, reducing parameter setup time and ensuring correct hardware recognition in the system topology.
What does a solid or flashing red LED on the module indicate?
A solid or flashing red LED on the READY / DC LINK / FAULT indicator signifies an internal hardware fault, trip, or DC link error that requires diagnostic evaluation via the Control Unit or software tools.
What power connections are required for installing this unit?
The unit requires 3-phase 380 V to 480 V AC input connected via M8 screw studs, an M6 protective earth connection, 24 V DC auxiliary busbar jumpers, and DRIVE-CLiQ bus connections.
Take advantage of our exchange formula
A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.
Play it safe with our warranty conditions
Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.
Data backup and recovery
Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.
Specific firmware and hardware versions
If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.
Disclaimer:
We are not an authorised distributor of Siemens.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.