Lenze 13325133 EVS9321-ES – 0.37 kW Servo Drive
Het item werd toegevoegd aan uw offerteaanvraag
Product Information
The Lenze 13325133 EVS9321-ES is a 9300 Servo servo drive / servo inverter for closed-loop motion control in industrial automation equipment. It is rated at 0.37 kW with a nominal output current of 1.5 A and is designed for 400/480 V AC three-phase systems. The supply voltage range is 320-528 V AC, with an 8 kHz switching frequency. The drive supports closed-loop position, speed and torque control for brushless servo motors and 4-pole asynchronous motors.
Control and enable functions are connected through the X5 control terminals, including Controller Inhibit/Enable at X5/28. The X11 interface provides the first disconnecting path of the KSR safety relay. CANopen communication is available through an optional plug-in System Bus CAN communication module. For commissioning a replacement, parameters can be backed up and transferred using Lenze Global Drive Control software or a Keypad XT module. The replacement should have a matching or higher firmware revision and the same frame size and power rating as the original drive.
The EVS9321-ES can be monitored and diagnosed through the Keypad XT module or by online parameter diagnostics in Lenze Global Drive Control software. Before returning a replacement servo drive to service, check the 0.37 kW rating, 1.5 A output current, 400/480 V AC supply requirements, motor compatibility, firmware and application parameter set. As a discontinued legacy product, this Lenze servo inverter is relevant for repair, maintenance and like-for-like replacement of existing 9300 Servo installations.
Technical Specifications
| Manufacturer | Lenze |
| Part number | 13325133 |
| Model/type | EVS9321-ES |
| Product family | 9300 Servo |
| Component type | Servo drive / servo inverter |
| Rated power | 0.37 kW |
| Rated power equivalent | 0.5 HP |
| Supply voltage | 400/480 V AC, 3-phase |
| Supply voltage range | 320-528 V AC |
| Rated output current | 1.5 A |
| Switching frequency | 8 kHz |
| Control modes | Closed-loop position, speed, and torque control |
| Supported motor types | Brushless servo motors and 4-pole asynchronous motors |
| Control interface | X5 control terminals; terminal X5/28 supports Controller Inhibit/Enable |
| Safety interface | X11 KSR safety relay, first disconnecting path |
| Communication | Optional CANopen via plug-in System Bus CAN communication module |
| Parameter storage | Non-volatile internal EEPROM with backup and restore support |
| Lifecycle status | Discontinued legacy product line |
Programming and Configuration
Lenze Global Drive Control software supports parameterization, commissioning, online monitoring and diagnostics for the EVS9321-ES. A Lenze Keypad XT module provides local parameter access and status display.
Application parameters are stored in non-volatile internal EEPROM memory. For a service replacement, the parameter set can be backed up from the original drive and transferred to the spare using Lenze Global Drive Control software or a Keypad XT module. The replacement drive should use a matching or higher firmware revision and the same frame size and power rating.
Communication and System Integration
The primary control connection is provided through the X5 control terminals. Terminal X5/28 supports the Controller Inhibit/Enable function. The X11 interface is used for the first disconnecting path of the KSR safety relay.
CANopen communication is available through an optional plug-in System Bus CAN communication module. This means the communication module configuration must match the installed system when a replacement drive is prepared for networked operation.
Diagnostics and Status Indication
Drive status can be viewed locally through the Keypad XT module, while Lenze Global Drive Control software provides online parameter diagnostic monitoring. These tools support commissioning checks and service diagnosis on existing Lenze 9300 Servo installations.
Replacement and Spare Part Considerations
For a like-for-like replacement, match the Lenze part number 13325133 and model EVS9321-ES, together with the 0.37 kW rating, 1.5 A rated output current, 400/480 V AC three-phase supply and applicable motor type. Also check the frame size, firmware revision, application parameter set and optional System Bus CAN communication module.
A spare is not ready for operation until the required parameters and system configuration have been transferred or restored. Use Lenze Global Drive Control software or a Keypad XT module to back up and transfer parameters, then verify the control terminals, safety interface, motor compatibility and CANopen configuration before commissioning.
Frequently Asked Questions
What is the Lenze 13325133 EVS9321-ES?
It is a Lenze 9300 Servo servo drive / servo inverter rated at 0.37 kW for 400/480 V AC three-phase systems, with a nominal output current of 1.5 A.
Which motors can the EVS9321-ES control?
The drive supports brushless servo motors and 4-pole asynchronous motors, with closed-loop position, speed and torque control.
How are parameters transferred to a replacement drive?
Parameters can be backed up and transferred using Lenze Global Drive Control software or a Keypad XT module. The replacement should have a matching or higher firmware revision and the same frame size and power rating.
Does the Lenze EVS9321-ES support CANopen?
CANopen communication is available through an optional plug-in System Bus CAN communication module.
How can the EVS9321-ES be diagnosed during commissioning?
Drive status can be monitored through the Keypad XT module, and online parameter diagnostics are available in Lenze Global Drive Control software.
Take advantage of our exchange formula
A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.
Play it safe with our warranty conditions
Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.
Data backup and recovery
Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.
Specific firmware and hardware versions
If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.
Disclaimer:
We are not an authorised distributor of Lenze.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.