Siemens 6SN1123-1AA00-0DA1 SIMODRIVE 611 80A LT Power Module
Het item werd toegevoegd aan uw offerteaanvraag
Product Information
The Siemens 6SN1123-1AA00-0DA1 is a single-axis power module (LT module) within the SIMODRIVE 611 product family, engineered for precise motor control in industrial CNC machine tools and automated motion systems. Built around an insulated-gate bipolar transistor (IGBT) power stage, this module converts a central 600 V DC link supply into controlled multi-phase output to drive feed and main spindle axes. It features an overall continuous rated current of 80 A, supporting specific motor drive requirements including 40 A for 1FT5 servomotors, 28 A for 1FT6 servomotors, and 30 A for both 1PH main spindle motors and standard AC induction motors. Thermal management is handled by an integrated internal cooling design, maintaining long-term operating stability without requiring external cabinet ducting.
Power distribution is established via direct connection to the common 600 V DC link bus bar supplied by a central SIMODRIVE 611 infeed module. The front panel features a dedicated slot for accommodating plug-in control units, such as SIMODRIVE 611-D, SIMODRIVE 611 Universal, or SIMODRIVE 611-A control cards. Because parameter sets, control logic, and drive bus communications reside entirely on the removable control card, replacing a damaged power module is straightforward. Maintenance personnel can swap out a failed power module by transferring the existing control unit without losing parameters or needing software reconfiguration. When sourcing replacement units, ABC Industrial Parts can assist maintenance teams with verified exchange units and spare hardware to minimize machine downtime.
System monitoring and diagnostics are conducted via NC/Drive System Diagnostics through the installed control card when connected to SINUMERIK 840D or SINUMERIK 810D CNC controllers. Diagnostic events, such as a drive power failure or bus communication fault, allow technicians to quickly determine whether issues originate in the DC link supply, cabling, or control module seating. First-line field checks should verify the DC link voltage, terminal connections, drive bus cables, and the physical seating of the control module. If internal hardware damage occurs on the power stage or IGBT module, the unit cannot be serviced in the field, making a tested replacement or repair through ABC Industrial Parts the most reliable route back to active operation.
Technical Specifications
| Manufacturer | Siemens |
| Part Number | 6SN1123-1AA00-0DA1 |
| Model / Type | LT Module |
| Product Family | SIMODRIVE 611 |
| Component Type | Servo Drive Power Module |
| Number of Axes | 1 |
| Rated Current | 80 A |
| DC Link Supply Voltage | 600 V DC |
| Rated Current (1FT5 Motors) | 40 A |
| Rated Current (1FT6 Motors) | 28 A |
| Rated Current (1PH Motors) | 30 A |
| Rated Current (Induction Motors) | 30 A |
| Cooling Type | Internal cooling |
Programming and Configuration
Configuration for the Siemens 6SN1123-1AA00-0DA1 power module is managed through the attached plug-in control card and the host controller interface. Because the power module houses the power stage while control logic is handled by a SIMODRIVE 611-D, 611 Universal, or 611-A control card, machine parameters and axis configuration data are stored within the control card and the master CNC system.
When swapping out a faulty power module, parameter transfer is straightforward. Removing the control module from the failed power stage and inserting it into the replacement chassis preserves axis assignments, motor parameters, and fieldbus settings. Maintenance technicians must ensure that NC machine data configuration correctly matches the drive axis assignments and that the control card hardware version is fully compatible with the host system firmware.
Communication and System Integration
The 6SN1123-1AA00-0DA1 integrates into the modular SIMODRIVE 611 lineup by connecting directly to the central 600 V DC link bus bar supplied by a central infeed module. This centralized power topology allows single-axis and multi-axis configurations to draw power efficiently from a shared DC bus within the control enclosure.
System bus communication and controller integration are established through the inserted control unit. Connected to SINUMERIK 840D or 810D CNC controllers, the drive system communicates via dedicated drive bus cabling. Proper bus termination, secure connector seating, and correct measuring circuit parameterization are essential to prevent communication timeouts or drive bus hardware errors.
Diagnostics and Status Indication
Diagnostic capabilities for the 6SN1123-1AA00-0DA1 power module are accessed via the attached control module and host CNC system. Through SINUMERIK 840D and 810D NC/Drive system diagnostics, operators can inspect real-time operating status, monitoring axis response, encoder feedback, and DC link power levels.
Status indications and system fault messages are communicated directly to the CNC display interface. Status LEDs reside on the front panel of the inserted control card rather than the power chassis base, so system troubleshooting relies on reading fault codes generated by the control interface or inspecting the diagnostic screens on the machine controller.
Replacement and Spare Part Considerations
Replacing a Siemens 6SN1123-1AA00-0DA1 power module requires verifying the match of the 80 A current rating, single-axis configuration, and internal cooling type. Matching the part number exactly ensures physical and electrical compatibility with the existing 600 V DC link bus bar connection and cabinet frame.
During replacement, isolate power to the SIMODRIVE system and allow the DC link capacitors to discharge fully before handling connections. Swap the existing control card (611-D, 611 Universal, or 611-A) into the replacement power module slot, verify encoder cabling and drive bus connections, and confirm that the control module is firmly seated before applying power.
Error Codes & Fault Codes
The following error codes may be displayed during operation or diagnostics:
| Code | Name | Description | Possible Cause | Recommended Action |
|---|---|---|---|---|
| 300007 | Axis %1 drive %2 not present or inactive | NC detected drive module axis is not responding or is marked inactive. | Faulty power module, loose control module connection, or missing supply voltage. | Check module connections, DC link power, and control unit seat. |
| 300008 | Axis %1 drive %2 measuring circuit %3 is not available | Measuring circuit for specified axis drive is missing or not detected. | Faulty measuring circuit hardware or encoder connection. | Check encoder connection cables and measuring circuit hardware. |
| 300009 | Axis %1 drive %2 measuring circuit %3 wrong measuring circuit type | Configured measuring circuit type does not match connected hardware. | Incorrect parameter setting or incompatible encoder/measuring circuit module. | Verify measuring circuit parameters and hardware configuration. |
| 300010 | Axis %1 drive %2 active without NC axis assignment | Drive module is powered up and active but not assigned to an NC axis. | Configuration error in NC machine data. | Check machine data configuration for drive axis assignments. |
| 300011 | Axis %1 drive %2 hardware version of spindle not supported | Spindle hardware version is incompatible with current firmware/drive combination. | Unsupported hardware revision or outdated firmware. | Verify hardware compatibility or update control unit firmware. |
| 300012 | Axis %1 drive %2 hardware version of control module not supported | Control module hardware version is not supported by system firmware. | Incompatible control card plugged into power module. | Replace control module with supported hardware version. |
| 300020 | Drive %1 removed for diagnostics | Drive axis removed from active configuration for diagnostic purposes. | Drive disabled via diagnostic selection. | Re-enable drive in software configuration when diagnostics complete. |
| 300100 | Drive power failure | Power failure detected on the drive power stage or DC link supply. | DC link undervoltage, blown fuse, or infeed module failure. | Check infeed module status, DC link bus voltage, and mains supply. If power module IGBT stage failed internally, replace module. |
| 300101 | Bus communications failure | Communication failure between NC/controller and drive bus. | Faulty drive bus cable, loose connector, or noise interference. | Check drive bus cables and connections. |
| 300200 | Drive bus hardware fault | Hardware error on the drive bus interface. | Internal drive bus hardware fault or defect on control module. | Internal hardware fault — inspect bus connectors or return unit/control card for repair. |
| 300201 | Axis %1 drive %2 timeout during access, error location %3 | Timeout error accessing drive register/parameter. | Communication interrupt or corrupted bus transfer. | Check drive bus and control card seating. |
Frequently Asked Questions
How do I transfer parameters when replacing the 6SN1123-1AA00-0DA1 power module?
Parameter sets reside on the plug-in control card (such as a SIMODRIVE 611-D, 611 Universal, or 611-A) rather than the power module. Transferring the existing control card into the replacement power module retains all machine data and motor parameters without reprogramming.
What motor types are compatible with the Siemens 6SN1123-1AA00-0DA1?
This 80 A power module supports Siemens 1FT5 servomotors (rated at 40 A), 1FT6 servomotors (rated at 28 A), 1PH main spindle motors (rated at 30 A), and standard AC induction motors (rated at 30 A).
What controllers integrate with this SIMODRIVE 611 power module?
The module integrates with Siemens SINUMERIK 840D and 810D CNC controllers when equipped with a compatible SIMODRIVE 611 plug-in control unit.
What should I check if fault code 300100 (Drive power failure) occurs?
Inspect the SIMODRIVE 611 infeed module status, verify the 600 V DC link bus voltage, and check input fuses. If power is supplied correctly but the error persists, the power module IGBT stage may have failed internally.
Does the 6SN1123-1AA00-0DA1 power module require external ductwork for cooling?
No, the module utilizes an internal cooling design with integrated heatsinks, eliminating the need for external cabinet cooling ductwork.
Take advantage of our exchange formula
A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.
Play it safe with our warranty conditions
Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.
Data backup and recovery
Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.
Specific firmware and hardware versions
If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.
Disclaimer:
We are not an authorised distributor of Siemens.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.