Lenze 00455656 ECSZZ020X4B Capacitor Module
Het item werd toegevoegd aan uw offerteaanvraag
Product Information
The Lenze 00455656 (model ECSZZ020X4B) is a capacitor module designed for the Lenze ECS Servo System family. Engineered as an energy-buffering unit for shared multi-axis DC bus architectures, it provides 2000 µF of capacitance to stabilize system voltage during dynamic motion cycles. Operating at a nominal rating of 565 V DC with a maximum threshold of 770 V DC, this component captures regenerative energy produced during motor deceleration and supplies extra energy during sudden acceleration spikes across automated machinery lines.
Interfacing directly with the shared DC bus, the module utilizes screw or plug-in terminal blocks labeled +UG and -UG for electrical connection. Commissioning a replacement unit is a direct hardware swap, requiring no software parameters, firmware programming, or digital network configuration. Prior to performing physical installation or maintenance, the system power must be disconnected and a discharge period of 3 to 5 minutes observed to allow stored electrical energy to clear safely. When sourced as a tested spare unit from ABC Industrial Parts, the replacement module drops directly into the drive rack to restore power stability without altering system wiring layout.
System status and electrical safety are monitored via a front-mounted voltage indicator LED, which remains solidly illuminated whenever the DC bus voltage exceeds 50 V DC. Troubleshooting involves visually checking this status LED and taking direct multimeter voltage measurements across the +UG and -UG terminals to verify complete discharge before handling. If the module fails to hold voltage stability or experiences internal component damage, hardware repairs are not field-serviceable; replacing the module with a tested exchange unit from ABC Industrial Parts provides a direct route back to full operational performance.
Technical Specifications
| Manufacturer | Lenze |
| Part Number | 00455656 |
| Model / Type | ECSZZ020X4B |
| Product Family | ECS Servo System |
| Component Type | Capacitor Module |
| Capacitance | 2000 µF |
| Nominal DC Bus Voltage | 565 V DC |
| Maximum DC Bus Voltage | 770 V DC |
| Interface Terminals | Screw/plug-in terminal block (+UG, -UG) |
| Lifecycle Status | Discontinued |
Diagnostics and Status Indication
The front cover of the Lenze ECSZZ020X4B features a dedicated voltage indicator LED that serves as a visual safety monitor for the internal energy storage. The LED remains solidly illuminated whenever dangerous DC voltage exceeding 50 V DC is present on the bus terminals, and turns off only when the module has discharged below this threshold.
Diagnostic procedures consist of visual checks on the front panel LED alongside manual verification. Technicians can perform direct voltage measurements across the +UG and -UG terminal blocks using a standard multimeter to ensure the DC bus is completely unpowered before conducting maintenance or replacing the module.
Status LED Indicators
| LED | Color/Status | Meaning |
|---|---|---|
| Ready / Voltage Indicator LED | Solid when >50V DC / OFF when discharged | Indicates DC bus voltage present (> 50 V DC). LED OFF indicates discharged or unpowered DC bus. |
Replacement and Spare Part Considerations
Replacing a Lenze 00455656 capacitor module requires strict adherence to electrical safety practices due to high DC voltages stored within the unit. Main power to the multi-axis drive rack must be turned off, followed by a mandatory 3-to-5-minute waiting period to allow the 2000 µF capacitance to discharge safely. Always confirm that the front voltage indicator LED is off and verify zero voltage across the +UG and -UG terminals using a multimeter before disconnecting cables.
Match the exact model code ECSZZ020X4B and part number 00455656 to ensure full compatibility with existing Lenze ECS power supply modules and drive racks. Because this module serves as a hardware component on the DC bus architecture (+UG, -UG), no firmware alignment or software project transfer is required when installing a replacement spare.
The Lenze ECS product series has reached discontinued status from the manufacturer, making quality tested spare modules essential for maintaining existing production equipment. In modernized installations, this unit also integrates into Lenze i700 and Cabinet Controller environments maintaining compatible multi-axis bus topologies.
Frequently Asked Questions
What is the function of the Lenze 00455656 capacitor module?
The Lenze 00455656 (ECSZZ020X4B) provides 2000 µF of supplemental energy buffering for Lenze ECS multi-axis servo drive racks, capturing regenerative braking energy during motor deceleration and preventing DC bus overvoltage trips.
What safety steps are required before replacing the ECSZZ020X4B module?
Power to the drive rack must be disconnected, followed by a mandatory 3 to 5 minute discharge wait time. Technicians must confirm that the front LED is off and measure zero voltage across the +UG and -UG terminals using a multimeter prior to handling.
Does replacing the Lenze 00455656 require software or parameter setup?
No software parameters or firmware programming are needed. The module connects directly to the +UG and -UG DC bus terminals as a hardware energy storage component.
How does the front status LED indicate device condition?
The LED remains solidly illuminated whenever the internal DC bus voltage exceeds 50 V DC. It switches off when the module is discharged or completely unpowered.
What system architectures support the Lenze 00455656 capacitor module?
It is compatible with Lenze ECS Servo System multi-axis drive racks and power supply modules using +UG and -UG DC bus lines, as well as Lenze i700 Cabinet Controller drive systems during system modernization.
Take advantage of our exchange formula
A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.
Play it safe with our warranty conditions
Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.
Data backup and recovery
Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.
Specific firmware and hardware versions
If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.
Disclaimer:
We are not an authorised distributor of Lenze.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.