Banner Q406EQ 3033398 – Through-Beam Photoelectric Sensor Emitter
Het item werd toegevoegd aan uw offerteaanvraag
Product Information
The Banner Q406EQ, model 3033398, is a Q40 Series DC through-beam photoelectric sensor emitter for long-distance object detection in industrial automation systems. It forms the emitter side of a through-beam sensor pair and supports sensing distances up to 60 m when matched with a compatible receiver. The unit operates from a 10-30 V DC supply, uses an LED light source, and combines an M30 threaded barrel mount with a rectangular block housing. IP67, IP69K, and NEMA 6P protection ratings support use in environments exposed to dust, moisture, water, and high-pressure washdown conditions.
A replacement Q406EQ must be matched with a compatible through-beam receiver for the required 60 m sensing range, a 10-30 V DC industrial control supply, and 4-pin M12 Euro-style quick-disconnect cabling. The integrated 4-pin M12 male connector helps simplify wiring and replacement, while the M30 threaded barrel supports installation in the existing mounting arrangement. Before commissioning a spare, check the emitter-receiver pairing, supply voltage, connector arrangement, sensing distance, and mechanical fit in the machine.
The Power LED indicates active power input and operational status of the emitter unit. For first-line replacement checks, confirm the 10-30 V DC supply, inspect the 4-pin M12 connection, and verify that the Q406EQ is paired with the correct through-beam receiver and aligned for the required sensing distance. Its protection ratings support demanding dust, moisture, and washdown environments, while a suspected internal sensor fault is a practical point for repair or exchange evaluation.
Technical Specifications
| Manufacturer | Banner |
| Part number | Q406EQ |
| Model/type | 3033398 |
| Component type | Through-beam photoelectric sensor emitter |
| Product family | Q40 Series DC |
| Sensing range | 60 m |
| Sensing mode | Through-beam emitter |
| Supply voltage range | 10-30 V DC |
| Light source | LED |
| Mounting | M30 threaded barrel mount |
| Housing format | Rectangular block with 30 mm threaded barrel design |
| Protection rating | IP67, IP69K, NEMA 6P |
| Electrical connection | Integrated 4-pin M12 Euro-style male quick-disconnect connector |
Diagnostics and Status Indication
The Q406EQ uses a Power LED to indicate active power input and operational status of the emitter unit. During replacement commissioning, check the LED together with the 10-30 V DC supply and the integrated 4-pin M12 connection.
If the emitter does not operate correctly in the machine, verify the connector, the through-beam receiver pairing, the required 60 m sensing range, and the emitter-receiver alignment. Internal sensor faults can be assessed for repair or exchange rather than resolved through field configuration.
Status LED Indicators
| LED | Color/Status | Meaning |
|---|---|---|
| Power LED | Indicates active power input and operational status of the emitter unit |
Replacement and Spare Part Considerations
For a compatible replacement, match the Banner Q406EQ part number, model 3033398, Q40 Series DC family, through-beam emitter function, 60 m sensing range, 10-30 V DC supply range, and integrated 4-pin M12 Euro-style male connector. The replacement must also suit the existing M30 threaded barrel mounting arrangement.
The Q406EQ operates as the emitter component of a through-beam pair, so the installed receiver must match the required 60 m range and installation requirements. Check the receiver pairing, cabling, supply voltage, connector, mounting, and emitter-receiver alignment before returning the machine to operation.
The IP67, IP69K, and NEMA 6P ratings are relevant when replacing a sensor in a dusty, wet, or washdown environment. If the original unit has an internal fault, a repair or tested exchange unit can provide a practical route for restoring the sensing circuit.
Frequently Asked Questions
What is the Banner Q406EQ used for?
The Banner Q406EQ is a Q40 Series DC through-beam photoelectric sensor emitter for object detection across distances up to 60 m. It can be used with a compatible receiver in conveyor, material handling, package presence, machine access, and production-line sensing systems.
Which receiver is required for a Banner Q406EQ replacement?
The Q406EQ must be paired with a compatible through-beam receiver matching the required 60 m sensing range and installation requirements.
What supply voltage and connector does the Q406EQ use?
The emitter operates from 10-30 V DC and has an integrated 4-pin M12 Euro-style male quick-disconnect connector.
How is the Q406EQ mounted?
The Q406EQ uses an M30 threaded barrel mount and has a rectangular block housing with a 30 mm threaded barrel design.
What protection ratings does the Banner Q406EQ have?
The Q406EQ has IP67, IP69K, and NEMA 6P protection ratings for demanding environments exposed to dust, moisture, water, and high-pressure washdown conditions.
What should be checked when a replacement Q406EQ does not operate?
Check the 10-30 V DC supply, the integrated 4-pin M12 connection, the compatible through-beam receiver, the required 60 m sensing range, and emitter-receiver alignment. The Power LED indicates active power input and operational status of the emitter unit.
Take advantage of our exchange formula
A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.
Play it safe with our warranty conditions
Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.
Data backup and recovery
Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.
Specific firmware and hardware versions
If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.
Disclaimer:
We are not an authorised distributor of Banner.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.