Lenze E82ZZ11334B210 8200 Vector 3-Phase RFI Filter
Het item werd toegevoegd aan uw offerteaanvraag
Product Information
The Lenze E82ZZ11334B210 is a 3-phase mains RFI (Radio Frequency Interference) filter engineered for integration with Lenze 8200 vector frequency inverters. Operating at a maximum supply voltage of 500 V AC across 50/60 Hz line frequencies, this noise suppression component carries a continuous current rating of 3.4 A per phase. It serves to attenuate high-frequency electrical disturbances and electromagnetic interference generated by variable frequency drive switching operations in industrial automation, material handling, and packaging systems.
Replacing an existing filter requires matching electrical ratings and maintaining proper physical wiring connections between the three-phase power line and the inverter input terminals. Designed for matching 3.4 A power modules within the 8200 vector series, the E82ZZ11334B210 is a passive hardware device that requires no parameter setup, firmware flashing, or software programming prior to putting a spare into service. When installing a replacement unit, maintaining standard low-impedance shield grounding across the cabinet surface is necessary to achieve effective noise attenuation, and expert guidance from ABC Industrial Parts can assist in verifying line-side wiring compatibility for legacy drive control panels.
Because the E82ZZ11334B210 operates without active status LEDs or integrated diagnostic logic, troubleshooting suspected filter issues relies on verifying power line continuity and ground connection integrity. Unresolved line-side noise interference, high-frequency distortion affecting nearby instruments, or physical degradation indicate that the filter unit may require replacement. When internal component wear or electrical breakdown impairs suppression performance, sourcing a tested replacement filter through ABC Industrial Parts offers a direct swap to restore EN 61800-3 compliance without requiring panel retrofits or drive replacements.
Technical Specifications
| Manufacturer | Lenze |
| Part Number | E82ZZ11334B210 |
| Component Type | RFI Filter |
| Product Family | 8200 Vector |
| Rated Current | 3.4 A |
| Supply Voltage Max | 500 V AC |
| Phase Count | 3 |
| Rated Frequency | 50/60 Hz |
| EMC Compliance Standard | EN 61800-3 |
Replacement and Spare Part Considerations
When replacing the Lenze E82ZZ11334B210 mains RFI filter in an operating control cabinet, verifying exact electrical rating alignment with the connected 8200 vector inverter power module is required. The replacement unit must match the 3.4 A continuous rating and 500 V AC three-phase rating to ensure proper thermal dissipation and avoid line overload conditions during motor drive acceleration.
Proper mechanical mounting and shield grounding are critical during installation to maintain compliance with EN 61800-3 interference suppression standards. The filter unit can be installed directly adjacent to or beneath the frequency inverter footprint, requiring short, low-impedance ground bonding contact against unpainted control cabinet backplates to optimize high-frequency noise attenuation.
Frequently Asked Questions
What is the primary function of the Lenze E82ZZ11334B210 filter?
The Lenze E82ZZ11334B210 is a 3-phase mains RFI filter designed to attenuate high-frequency radio frequency noise and electromagnetic interference generated by Lenze 8200 vector frequency inverters, ensuring installation compliance with EN 61800-3 standards.
Is software programming or configuration required when installing a spare E82ZZ11334B210?
No software configuration, parameter transfer, or firmware installation is required. The E82ZZ11334B210 is a passive hardware component that functions immediately upon correct physical mounting and line terminal wiring.
Which drive models are compatible with this filter?
The E82ZZ11334B210 is specifically engineered for use with Lenze 8200 vector series frequency inverters and matching 3.4 A rated 8200 vector power modules.
What are the electrical ratings for the E82ZZ11334B210 filter?
The unit operates on 3-phase AC systems up to 500 V AC at 50/60 Hz, supporting a continuous rated current of 3.4 A per phase.
How should the E82ZZ11334B210 filter be mounted inside a control panel?
The filter can be mounted directly adjacent to or beneath the 8200 vector drive inside the cabinet. Effective attenuation relies on standard low-impedance shield grounding and clean ground contacts against the mounting plate.
Take advantage of our exchange formula
A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.
Play it safe with our warranty conditions
Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.
Data backup and recovery
Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.
Specific firmware and hardware versions
If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.
Disclaimer:
We are not an authorised distributor of Lenze.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.