Lenze 15843426 E84AVTCE1134SB0 8400 TopLine Frequency Inverter
Het item werd toegevoegd aan uw offerteaanvraag
Product Information
The Lenze 15843426, designation E84AVTCE1134SB0, is an 11 kW cabinet-mounted frequency inverter from the Lenze 8400 TopLine series designed for dynamic motion control, multi-axis synchronization, and precision positioning. Operating on a 3-phase AC supply voltage between 320 V and 528 V AC, this unit provides a rated continuous output current of 23.5 A with a peak overload capacity of 35.3 A for up to 60 seconds. It supports multiple motor control regimes including V/f characteristic control, sensorless vector control, and closed-loop servo control with an integrated multi-encoder interface for high-frequency regulation up to 599 Hz. Housed in an IP20 enclosure, the unit features integrated Safe Torque Off (STO) functionality to provide hardware-level functional safety without requiring external line contactors.
Integrating a replacement drive into an existing control architecture depends on matching the mechanical footprint, communication modules, and internal parameter set. The drive includes built-in CANopen system bus capability alongside a Communication Module Interface (MCI) slot that accepts expansion cards for PROFINET (E84AYCER), PROFIBUS-DP (E84AYCPM), or EtherCAT (E84AYCET). Modernizing or servicing a unit is straightforward because configuration data is held directly on a pluggable L-force memory card. Transferring this memory card from a failed unit into a replacement hardware module moves the operational parameters, drive profile, and network setup without requiring direct software connection. When parameter extraction from a damaged drive or hardware donor unit is necessary, expert technical support from ABC Industrial Parts can assist in preparing replacement hardware for immediate commissioning.
Front-panel LED indicators provide real-time status diagnostics for operation and network health, featuring dedicated LEDs for drive readiness, general fault conditions, and CAN bus states. Common runtime trips include DC bus undervoltage (LU), DC bus overvoltage (OU), output short-circuit or earth faults (OC1), motor overload (OC5), and heatsink overtemperature (OH). Routine first-line troubleshooting should verify 3-phase mains balance, check motor winding insulation with the inverter disconnected, inspect cabinet cooling fans, and ensure the L-force memory module is fully seated. If the drive continues to fault with motor cables disconnected or shows persistent internal power stage failure, internal component defects are indicated; in such cases, securing a tested exchange unit or utilizing overhaul services through ABC Industrial Parts offers a fast path to restoring production.
Technical Specifications
| Manufacturer | Lenze |
| Part Number | 15843426 |
| Model / Type | E84AVTCE1134SB0 |
| Product Family | 8400 TopLine |
| Component Type | Frequency Inverter |
| Rated Power | 11 kW |
| Supply Voltage Range | 320 - 528 V AC (3-phase) |
| Rated Output Current | 23.5 A |
| Maximum Output Current | 35.3 A (150% for 60 s) |
| Maximum Output Frequency | 599 Hz |
| Control Method | V/f, Sensorless Vector Control, Servo Control |
| On-Board Fieldbus | CANopen |
| Safety Function | Safe Torque Off (STO) |
| Protection Rating | IP20 |
Programming and Configuration
Configuration and commissioning of the Lenze E84AVTCE1134SB0 are managed through Lenze engineering software tools, including EASY Starter for simplified diagnostics and service, and L-force Engineer for full machine motion control engineering. Drive parameters, ramp profiles, motor identification parameters, and closed-loop control gain settings can be loaded, modified, and saved directly across fieldbus interfaces or local service adapters.
For direct machine-side operation and parameter modification without a PC, the unit supports the optional Lenze Keypad X400 (model E84AVZKE). In addition, all operational drive data is stored on a removable L-force memory card. When swapping identical drives, transferring the memory card automatically loads the complete configuration onto the new power unit, minimizing tool requirements and parameter entry errors during field replacement.
Communication and System Integration
The Lenze 15843426 features native CANopen system bus capability integrated on-board, allowing direct multi-axis communication, trajectory synchronization, and drive parameter access. The integrated multi-encoder interface accepts standard motor feedback devices to deliver high-bandwidth closed-loop positioning and speed control.
For broader network architectures, the drive incorporates a Communication Module Interface (MCI) slot. This interface accepts option modules to connect the inverter directly to industrial Ethernet and fieldbus networks, including PROFINET via module E84AYCER, PROFIBUS-DP via module E84AYCPM, and EtherCAT via module E84AYCET.
Diagnostics and Status Indication
The front panel of the drive provides physical LED status indicators for quick machine-side troubleshooting. Dedicated status LEDs report overall inverter operational state, fault conditions, and active status for the integrated CANopen fieldbus interface.
Detailed fault evaluation is supported by internal error memory logs, accessible using EASY Starter software or the Keypad X400. In addition, fieldbus control words and status words allow real-time monitoring of drive operating states, actual motor speed, output current, and error flags via CANopen or optional communication networks.
Status LED Indicators
| LED | Color/Status | Meaning |
|---|---|---|
| DRIVE READY | Green - Solid/Blinking | Continuously lit when operational and ready; blinking during active operation or initialization. |
| DRIVE ERROR | Red - Solid/Flashing | Lit or blinking indicates a fault or warning. Fast flashing indicates a major fault requiring a reset or service. |
| CAN BS | Green - Solid/Blinking | Indicates CAN bus status (Operational / Pre-Operational / Stopped). |
| CAN ER | Red - Solid/Flashing | Indicates CAN network bus error, bus-off, or frame collision. |
Replacement and Spare Part Considerations
When selecting a replacement for a Lenze 15843426 (E84AVTCE1134SB0), verify that the power rating (11 kW), continuous current output (23.5 A), and voltage range (320-528 V AC) match the existing drive specification. Ensure the original communication option module (such as PROFINET, PROFIBUS, or EtherCAT) is removed from the old unit and securely inserted into the Communication Module Interface slot of the spare unit.
Zero-downtime drive swapping is facilitated by transferring the L-force memory card from the existing inverter to the replacement. Always isolate power before removing or inserting memory modules or communication option cards. If the memory module itself exhibits a checksum error (fault code EER), parameters must be downloaded from back-up project files using EASY Starter or L-force Engineer software.
Error Codes & Fault Codes
The following error codes may be displayed during operation or diagnostics:
| Code | Name | Description | Possible Cause | Recommended Action |
|---|---|---|---|---|
| LU | DC Bus Undervoltage | DC-bus voltage fell below the specified undervoltage threshold level. | Mains voltage too low, supply phase loss, or main contactor open. | Check mains voltage, verify line fuses and mains supply connections. |
| OU | DC Bus Overvoltage | DC-bus voltage exceeded the upper trip limit during deceleration or overhauling load. | Braking energy too high, deceleration ramp time too short, or brake resistor disconnected / open. | Increase deceleration ramp time, check internal brake chopper and external brake resistor connection. |
| OC1 | Short Circuit / Earth Fault | Instantaneous overcurrent detected at inverter output terminals. | Short circuit in motor cable, earth fault in motor windings, or damaged inverter output stage. | Disconnect motor cables and measure insulation resistance; check motor windings. If fault persists with motor disconnected, internal power module is damaged. |
| OC5 | I2t Motor Overload | Continuous motor current overload calculated by I2t thermal model. | Mechanical blockage, excessive load torque, incorrect motor parameters set in drive. | Check mechanical drive train for jamming, verify motor nameplate data in parameter configuration. |
| OH | Heatsink Overtemperature | Inverter heatsink temperature exceeded the permissible thermal limit. | Cabinet ventilation failure, clogged heatsink cooling fins, ambient temperature too high, or fan failure. | Clean heatsink, verify control cabinet fan operation, improve cabinet airflow. |
| OH4 | Drive Interior Overtemperature | Internal air / board temperature sensor exceeded threshold. | Internal air recirculation blocked or excessive ambient temperature. | Check ambient temperature inside electrical enclosure and ensure fans are operating. |
| EER | Memory Module Fault | Communication failure or checksum error accessing the memory module. | Memory module not plugged in securely, corrupted EEPROM data, or defective memory module. | Turn off power, re-seat memory module. If error recurs, replace memory module and re-commission drive. |
| NMAX | Maximum Speed Exceeded | Actual motor speed exceeded maximum speed threshold limit. | Uncontrolled overhauling load, encoder fault, or motor control loop instability. | Check speed feedback encoder wiring, check gain settings in speed controller. |
Frequently Asked Questions
What is the primary function of the Lenze 15843426 frequency inverter?
The Lenze 15843426 (model E84AVTCE1134SB0) is an 11 kW 8400 TopLine inverter designed for speed, vector, and dynamic servo positioning control of AC motors in industrial automation systems.
How are parameter settings transferred when replacing an E84AVTCE1134SB0 drive?
Parameter settings are stored on a pluggable L-force memory card. Moving the memory card from the original unit to the replacement inverter transfers all configuration data without needing a software connection.
What integrated safety features are included in this drive model?
The 'SB0' designation indicates integrated Safe Torque Off (STO) functional safety, which safely interrupts power to the motor output stage without disconnecting mains power.
Which communication networks are supported by the E84AVTCE1134SB0?
The drive includes built-in CANopen communication and features a slot for optional modules such as PROFINET (E84AYCER), PROFIBUS-DP (E84AYCPM), and EtherCAT (E84AYCET).
What software is used to program and diagnose Lenze 8400 TopLine inverters?
Lenze EASY Starter is used for routine diagnostics and service, while L-force Engineer is utilized for comprehensive system commissioning and control engineering.
What does an OC1 error code indicate on this inverter?
An OC1 fault indicates an output short circuit or earth fault. If the error continues after disconnecting motor wiring, the drive's internal power module is damaged and requires repair or drive replacement.
Take advantage of our exchange formula
A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.
Play it safe with our warranty conditions
Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.
Data backup and recovery
Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.
Specific firmware and hardware versions
If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.
Disclaimer:
We are not an authorised distributor of Lenze.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.