Lenze 762 760 AC Inverter 2 HP 230V (LENZE-762)
Het item werd toegevoegd aan uw offerteaanvraag
Product Information
The Lenze 762 (LENZE-762) is a 2 HP (1.5 kW) AC frequency inverter from the Lenze 760 Series, engineered for speed control of standard 3-phase AC induction motors in industrial machinery. Operating on an input voltage range of 208–240 V AC, this compact drive delivers a 230 V AC 3-phase output with a continuous current rating of 7 A and an adjustable output frequency range from 0 to 120 Hz. Utilizing V/f (Volts per Hertz) scalar control, the inverter features an integrated front panel with a 3-digit 7-segment LED display and programming keys for direct operational monitoring and local configuration.
Integrating the drive into an electrical panel involves wiring the AC power supply, motor connections, and control terminals, which consist of 4 programmable digital inputs and 1 configurable analog input supporting 0–10 V DC or 4–20 mA reference signals. Operating parameters are stored within non-volatile EEPROM memory to safeguard drive settings against power loss. Commissioning a replacement unit requires entering parameter values manually using the front keypad to match motor ratings, acceleration and deceleration ramps, and terminal functionality. ABC Industrial Parts provides tested spare drives to help support fast parameter configuration and reduce machine downtime.
System state and operational feedback are provided via the front-panel 3-digit 7-segment display, which presents active output frequency during normal operation and specific fault codes during trip conditions. Diagnostic checks should begin with verifying line voltage, terminal wiring, motor insulation, and mechanical loading. If the drive reports severe internal memory errors like EEPROM failures, board-level field repairs are generally not practical; installing a fully tested replacement drive through ABC Industrial Parts offers a dependable path back to continuous production.
Technical Specifications
| Manufacturer | Lenze |
| Part Number | LENZE-762 |
| Model / Type | 760 AC INVERTER 2 HP 230V |
| Product Family | 760 Series |
| Component Type | AC Frequency Inverter |
| Power Rating | 2 HP (1.5 kW) |
| Supply Voltage Range | 208 - 240 V AC |
| Output Voltage | 230 V AC |
| Output Current | 7 A |
| Output Frequency Range | 0 - 120 Hz |
| Control Method | V/f (Volts per Hertz) |
| Digital Inputs | 4 |
| Analog Inputs | 1 (0-10V DC / 4-20mA) |
Programming and Configuration
Programming the Lenze 762 frequency inverter is performed directly using the front panel keypad and the integrated 3-digit 7-segment display. The interface allows technical personnel to access parameter groups, adjust acceleration and deceleration times, configure current limits, and select input terminal logic without external software or interface cables.
All parameter values are saved directly into non-volatile EEPROM memory, securing configuration settings against loss during power outages or line interruptions. When replacing an existing unit, parameter settings must be transferred manually using the keypad to ensure proper alignment with motor nameplate data and process control signals.
Communication and System Integration
The Lenze 762 drive provides physical terminal connectivity for machine automation integration. Control wiring connects to 4 programmable digital inputs dedicated to operational functions such as start, stop, and direction control, along with 1 configurable analog input accepting standard 0–10 V DC or 4–20 mA reference signals for speed control.
Operating standard 3-phase AC induction motors rated up to 2 HP (1.5 kW), the drive provides continuous speed regulation from 0 to 120 Hz using V/f scalar control, making it suitable for material handling conveyors, industrial fans, and centrifugal pumps.
Diagnostics and Status Indication
Real-time status monitoring on the Lenze 762 inverter is provided by the built-in 3-digit 7-segment LED display. Under normal operating conditions, the display shows the active motor output frequency. When an operational error occurs, the display changes to output specific alphanumeric fault codes for quick troubleshooting.
Status LED Indicators
| LED | Color/Status | Meaning |
|---|---|---|
| DISPLAY | 3-digit 7-segment display | 3-digit 7-segment display shows output frequency during operation, parameter numbers/values during setup, or alarm codes on fault condition |
Replacement and Spare Part Considerations
When selecting a replacement for a Lenze 762 drive, verify electrical compatibility against existing installation parameters: 208–240 V AC input, 230 V AC 3-phase output, 7 A continuous output current, and 2 HP (1.5 kW) motor capacity. Confirm that control wiring matches the 4 digital input terminals and 1 analog speed reference input.
Parameter settings stored in the internal EEPROM must be manually configured on the spare unit via the integrated keypad interface prior to operating the motor. For broader system redesigns or panel retrofits, the drive can be migrated to current Lenze i510 or Lenze i550 cabinet frequency inverter series.
Error Codes & Fault Codes
The following error codes may be displayed during operation or diagnostics:
| Code | Name | Description | Possible Cause | Recommended Action |
|---|---|---|---|---|
| F01 | Overcurrent (OC) | Instantaneous overcurrent detected at drive output terminals | Short circuit on motor output, motor jammed, acceleration time too short, or motor capacity too large for drive | Check motor and wiring for short circuits or ground faults. Increase acceleration time. Verify motor rating. |
| F02 | Overvoltage (OU) | DC bus voltage exceeded maximum allowable threshold | Excessive regenerative energy during deceleration or high line input voltage | Increase deceleration time or install dynamic braking resistor if supported. Check input AC voltage. |
| F03 | Undervoltage (LU) | DC bus voltage dropped below operating threshold | Line voltage too low, temporary power interruption, or blown input fuse | Check main AC input power supply and input fuses. |
| F04 | Overtemperature (OH) | Drive heatsink temperature exceeded safe limit | Insufficient cooling, fan failure, dirty heatsink, or high ambient temperature | Check drive cooling fan, clear heatsink air passages, and ensure ambient temperature is within limits. |
| F05 | Overload (OL) | Motor or inverter overload condition detected over time | Continuous operation above rated current or excessive mechanical load on motor | Reduce mechanical load on motor. Check motor rated current parameter setting. |
| F06 | EEPROM Fault (Er) | Parameter memory checksum error or EEPROM read/write failure | Power failure during parameter save or internal EEPROM failure | Reset unit to factory default values and re-program. If fault persists, internal hardware error requires repair or replacement. |
Frequently Asked Questions
What power rating and supply voltage are required for the Lenze 762?
The Lenze 762 inverter operates on a 208–240 V AC input supply and supplies a 230 V AC 3-phase output rated for standard induction motors up to 2 HP (1.5 kW) with a continuous output current of 7 A.
How are parameters configured and stored on the Lenze 762 drive?
Parameters are programmed manually using the front panel keypad and 3-digit 7-segment display. All configured parameters are stored in non-volatile EEPROM memory to prevent data loss during power cycles.
What control I/O terminals are available on the Lenze 762 inverter?
The drive includes 4 programmable digital inputs for functions such as start, stop, and direction, along with 1 configurable analog input accepting either 0–10 V DC or 4–20 mA signals for speed reference.
What do fault codes F01 and F06 mean on the display?
F01 indicates an instantaneous output overcurrent, often caused by motor short circuits or jammed mechanical loads. F06 indicates an EEPROM memory checksum error, which requires resetting to factory defaults or replacing the unit if the error persists.
What replacement migration paths exist for the Lenze 762?
Besides replacing the inverter with an identical Lenze 762 spare unit, modern retrofits can migrate control to Lenze i510 or Lenze i550 cabinet frequency inverter series.
Take advantage of our exchange formula
A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.
Play it safe with our warranty conditions
Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.
Data backup and recovery
Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.
Specific firmware and hardware versions
If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.
Disclaimer:
We are not an authorised distributor of Lenze.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.