Lenze EMB8253-E EMB 8253-E EMC Mains Filter
Het item werd toegevoegd aan uw offerteaanvraag
Product Information
The Lenze EMB8253-E is a 3-phase EMC mains filter designed to operate alongside the Lenze 8200 vector frequency inverter family. Engineered for line voltages up to 500 V AC (+10%) across supply frequencies ranging from 48 Hz to 62 Hz, this filter provides essential radio frequency interference suppression in automated control systems. With a continuous rated current of 24 A and an IP20 ingress protection rating, the unit suppresses high-frequency electrical noise generated by variable speed drives before it can travel back into the mains network or affect nearby electronic devices.
Power connections are made using industrial screw terminals dedicated to 3-phase mains input and filtered output to the inverter. When putting a replacement module into service, panel technicians can choose between space-saving footprint mounting directly behind the 8200 vector drive chassis or traditional lateral side mounting depending on available cabinet dimensions. Because this is a passive suppression device, commissioning requires matching current ratings, verifying terminal tightness, and confirming wire phase sequence without software loading or parameter adjustments. ABC Industrial Parts supports maintenance teams by supplying exact-fit replacement units to keep legacy automation hardware running without panel modifications.
Routine diagnostic checks on the module focus on manual physical and electrical testing. Technicians should conduct regular visual inspections of the screw terminal blocks and wiring connections to prevent loose terminations and overheating. Electrical verification is performed through continuity checks and insulation resistance testing between phase terminals and the grounded frame using a multimeter or megohmmeter. When internal hardware degradation occurs, replacing the filter restores full EN 61800-3 compliance and protects downstream drive equipment.
Technical Specifications
| Manufacturer | Lenze |
| Part Number | EMB8253-E |
| Model / Type | EMB 8253-E Mains Filter |
| Component Type | EMC Mains Filter |
| Product Family | 8200 vector |
| Maximum Operating Voltage | 500 V AC |
| Rated Continuous Current | 24 A |
| Phase Configuration | 3-Phase |
| Mains Frequency Range | 48 - 62 Hz |
| Mounting Options | Footprint or Side Mount |
| Protection Rating | IP20 |
| EMC Standard | EN 61800-3 |
| Lifecycle Status | Discontinued |
Diagnostics and Status Indication
Operational assessment of the Lenze EMB8253-E line filter relies on targeted manual inspection methods. As a passive noise filter, the unit functions without active status LEDs or internal diagnostic logic, making visual checks of the terminal connections and power cabling the primary preventative maintenance task.
In the event of line disturbances or power issues, technicians can verify the module using basic test equipment. Conducting continuity checks across the input and output phases and taking insulation resistance measurements between phase terminals and the enclosure frame with a standard multimeter or megohmmeter helps locate potential open circuits or insulation breakdown.
Replacement and Spare Part Considerations
Replacing a Lenze EMB8253-E mains filter requires matching the electrical ratings of the operating 8200 vector drive. The replacement unit must support a 24 A continuous operating current at up to 500 V AC on 3-phase supply lines to handle continuous drive operation without excessive heating or reduced filtering performance.
Mechanical fitment must also be verified prior to installation. Panel builders should ensure that the chosen mounting orientation—whether utilizing space-saving sub-assembly footprint mounting behind the drive chassis or lateral panel mounting—matches the hole pitch and cabinet space allocated in the original enclosure layout.
Frequently Asked Questions
What is the function of the Lenze EMB8253-E EMC mains filter?
The EMB8253-E suppresses high-frequency radio interference on incoming power lines for Lenze 8200 vector frequency inverters, protecting sensitive control hardware and maintaining EN 61800-3 standard compliance.
What power supply specifications are required for the EMB8253-E?
The filter is designed for 3-phase AC networks operating up to 500 V AC (+10%) at frequencies between 48 Hz and 62 Hz, with a maximum continuous current rating of 24 A.
How is the EMB8253-E filter physically mounted?
It offers two mounting styles: footprint mounting directly underneath or behind the matching 8200 vector drive chassis, or conventional lateral side mounting on the control enclosure panel.
Does replacing the EMB8253-E require software programming?
No. The EMB8253-E is a passive hardware component with no internal software, parameters, or fieldbus configuration. Commissioning involves mechanical mounting and wiring to screw terminals.
How do you test a Lenze EMB8253-E line filter for proper function?
Testing is completed manually by performing visual inspections on terminal wiring and using a multimeter or megohmmeter to measure phase continuity and insulation resistance to ground.
Take advantage of our exchange formula
A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.
Play it safe with our warranty conditions
Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.
Data backup and recovery
Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.
Specific firmware and hardware versions
If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.
Disclaimer:
We are not an authorised distributor of Lenze.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.