Lenze 00387539 EMZ8275IB INTERBUS Communication Module
Het item werd toegevoegd aan uw offerteaanvraag
Product Information
The Lenze 00387539 EMZ8275IB is an INTERBUS fieldbus communication module in the Lenze 8200 vector product family, engineered to integrate frequency inverters and drive controllers into automated network structures. Designed as a function plug-in card, the unit connects directly into the host drive via a standardized Function Module Interface (FIF) slot and draws its required 5V DC operating power directly from the host without external supply wiring. Featuring an RS-422 physical bus interface operating at a 500 kbps baud rate through a standard 9-pin D-Sub connector, it enables real-time drive control, status monitoring, and parameterization across automotive manufacturing, material handling, and packaging lines.
Commissioning a replacement EMZ8275IB module involves mechanical installation into the host drive FIF slot followed by network parameter alignment. The module provides seamless communication for both Lenze 8200 vector frequency inverters and Lenze 9300 series drive controllers. Configuration settings, node addresses, and operational modes are established using Lenze Global Drive Control (GDC) software or an EMZ8201BB operating keypad. When installing a replacement, verifying matching network baud rates and bus addresses ensures immediate communication with the INTERBUS master station. ABC Industrial Parts supports maintenance technicians with tested replacement units to restore fieldbus network operations promptly.
Diagnostic feedback on the EMZ8275IB is provided via five front-panel LED indicators: UL for module supply voltage, CC for cable connection check, BA for active bus data transfer, RD for remote bus disabled status, and FO for module hardware faults. Further diagnostic insight is accessible directly through drive registers C0061 and C0062 using GDC software or the keypad. Primary communication issues, such as fault codes CE0 for fieldbus timeouts and CE1 for FIF slot process data transfer errors, should be checked by inspecting fieldbus wiring and verifying firm module seating in the FIF slot. In cases where persistent hardware errors or a solid FO LED occur, internal board-level faults require unit replacement, where ABC Industrial Parts provides fast delivery of replacement components.
Technical Specifications
| Manufacturer | Lenze |
| Part Number | 00387539 |
| Model / Type | EMZ8275IB |
| Component Type | Communication Module |
| Product Family | 8200 vector |
| Compatible Drive Systems | Lenze 8200 vector, Lenze 9300 drive controllers |
| Fieldbus System | INTERBUS |
| Baud Rate | 500 kbps |
| Bus Interface | RS-422 |
| Connector Type | D-Sub 9-pin |
| Mounting Interface | FIF (Function Module Interface) Slot |
| Lifecycle Status | Discontinued |
Programming and Configuration
Parameterization and network setup for the Lenze 00387539 EMZ8275IB function module are managed through Lenze Global Drive Control (GDC) software or directly using the optional EMZ8201BB operating keypad module. Communication parameters, process data assignments, and node settings are configured within the host drive memory, allowing the INTERBUS master station to exchange control data and status registers directly with the inverter.
Specific diagnostic registers C0061 and C0062 within the host drive allow real-time reading of communication status and error states. When replacing a module or setting up a spare, technicians can connect via GDC or the keypad to verify that the node address and transmission setup match system requirements, ensuring quick re-establishment of fieldbus communications.
Communication and System Integration
The EMZ8275IB connects the host drive to an INTERBUS fieldbus network operating at a fixed baud rate of 500 kbps over an RS-422 differential physical layer. Network connection is made via an integrated 9-pin D-Sub connector, offering reliable signal transmission in high-noise industrial environments.
Designed to plug directly into the host drive's Function Module Interface (FIF) slot, the module seamlessly integrates with Lenze 8200 vector frequency inverters and Lenze 9300 series drive controllers. The direct FIF interface handles both power distribution (5V DC internal supply) and high-speed process data transfer without requiring external power supplies or separate inter-rack cabling.
Diagnostics and Status Indication
Visual status monitoring on the front panel of the Lenze 00387539 EMZ8275IB is provided by five status LEDs labeled UL, CC, BA, RD, and FO. These indicators allow technicians to perform immediate visual checks on power delivery, physical cable integrity, bus activity, remote segment disabling, and hardware health.
Software diagnostics are accessible through drive parameters C0061 and C0062 via Global Drive Control (GDC) software or the EMZ8201BB operating keypad. These registers provide insight into process data exchange status and internal interface status between the drive CPU and the FIF function module.
Status LED Indicators
| LED | Color/Status | Meaning |
|---|---|---|
| UL | Active | Supply voltage (5V DC) active on function module |
| CC | Active | Cable Check: physical connection to INTERBUS master/previous node verified |
| BA | Active | Bus Active: active data transfer on INTERBUS network |
| RD | Active | Remote Bus Disabled: INTERBUS remote bus segment disconnected or errored |
| FO | Active | Fail/Fault: internal hardware or module initialization failure. Persistent FO LED indicates unserviceable internal hardware fault requiring unit replacement |
Replacement and Spare Part Considerations
Although the Lenze 8200 vector series and its communication function modules are discontinued, the 00387539 EMZ8275IB remains an essential spare part for maintaining existing automated production lines in automotive, logistics, and packaging machinery. Using the exact part number ensures full mechanical fit and signal compatibility across both 8200 vector inverters and 9300 controllers.
When installing a replacement unit, ensure the drive is completely powered down before unseating the faulty module or inserting the replacement into the FIF slot to prevent connector pin damage. Once inserted, verify that node address and configuration settings match the network master, and monitor the front-panel LEDs during power-up to confirm normal supply voltage and bus activity.
Error Codes & Fault Codes
The following error codes may be displayed during operation or diagnostics:
| Code | Name | Description | Possible Cause | Recommended Action |
|---|---|---|---|---|
| CE0 | Communication Error 0 | INTERBUS fieldbus communication timeout or link failure on FIF slot | Bus cable disconnected, INTERBUS master stopped or errored, invalid baud rate or bus address | Check bus cable integrity, verify INTERBUS master status and address settings. If connection and master are healthy but error persists, hardware internal fault requires module replacement. |
| CE1 | Communication Error 1 | Process data transfer error between inverter host and function module | Module improperly seated in FIF slot or internal board-level communication fault | Power down drive, unseat and re-seat module firmly in FIF slot. Replace unit if error persists. |
Frequently Asked Questions
Which drives are compatible with the Lenze 00387539 EMZ8275IB module?
The EMZ8275IB communication module is compatible with Lenze 8200 vector frequency inverters and Lenze 9300 series drive controllers via the standardized Function Module Interface (FIF) slot.
Does the Lenze EMZ8275IB require an external power supply?
No, the module receives its 5V DC power supply directly from the host drive through the internal FIF slot connection, so external power wiring is not required.
How are parameterization and diagnostic checks performed on this module?
Parameterization and network diagnostics are carried out using Lenze Global Drive Control (GDC) software or an EMZ8201BB operating keypad, utilizing drive parameters C0061 and C0062 to verify network status.
What does a solid FO LED indicate on the front panel?
A persistent FO (Fail/Fault) LED indicates an unserviceable internal hardware fault or module initialization failure, which requires replacing the function module.
How should fault codes CE0 and CE1 be addressed?
Fault code CE0 indicates a fieldbus communication timeout; check network cabling, master status, and address settings. Fault code CE1 indicates a process data transfer error between host and module; power down the drive and re-seat the module firmly in the FIF slot.
Take advantage of our exchange formula
A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.
Play it safe with our warranty conditions
Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.
Data backup and recovery
Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.
Specific firmware and hardware versions
If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.
Disclaimer:
We are not an authorised distributor of Lenze.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.