Lenze E82ZAFSC001 Standard I/O Function Module
Het item werd toegevoegd aan uw offerteaanvraag
Product Information
The Lenze E82ZAFSC001 is a Standard I/O function module engineered to expand the control interface of Lenze 8200 vector and 8200 motec frequency inverters. Operating within the modular function module framework of the 8200 series, this card installs directly into the host drive Function Interface (FIF) slot to establish backplane communication with the main drive controller. The module provides integrated 10 V DC and 20 V DC auxiliary power outputs, allowing direct connection of external speed potentiometers and digital control switches without requiring an external sensor power supply.
Replacing or installing the E82ZAFSC001 involves configuring hardware DIP switches and confirming terminal wiring across its pluggable screw-clamp terminal block connectors. The module features four digital inputs, including a dedicated controller enable input and a flexible channel supporting frequency command signals up to 10 kHz. Analog command integration is handled via a 10-bit analog input, which must be set via onboard DIP switches to match the signal format of the system, whether 0–10 V, 0–20 mA, or 4–20 mA. Additional interfaces include an open-collector transistor digital output, a 0–10 V DC analog output for speed or torque monitoring, and an SPDT changeover relay output rated for 250 V AC at 3 A or 24 V DC at 2 A. To commission a replacement spare, engineers can align parameters and monitor signal states using Lenze Global Drive Control (GDC) software or an E82ZBC operating keypad, with technical guidance available from ABC Industrial Parts when verifying drive settings.
Diagnostic information is provided on the module front panel via two visual status LEDs. A solid green LED indicates that the function module is properly plugged into the host drive and operating under normal power conditions, while a solid or flashing red LED signals an active drive fault or module configuration error. Operational troubleshooting is supported by host parameter readouts, including code C0051 for digital input status and code C0034 for analog input level, accessible via GDC software or the E82ZBC keypad module. If basic line checks, DIP switch positions, and terminal connections are verified but fault conditions persist, internal hardware damage on the drive or interface board may require a tested exchange unit or professional repair from ABC Industrial Parts.
Technical Specifications
| Manufacturer | Lenze |
| Part Number | E82ZAFSC001 |
| Model / Type | Standard I/O Function Module |
| Compatible Drive Series | Lenze 8200 vector / Lenze 8200 motec |
| Installation Interface | Function Interface (FIF) slot |
| Digital Inputs | 4 |
| Digital Input Frequency Range | Up to 10 kHz |
| Digital Outputs | 1 (Transistor open-collector) |
| Analog Inputs | 1 (10-bit resolution) |
| Analog Input Signal Formats | 0-10 V / 0-20 mA / 4-20 mA (DIP switch selectable) |
| Analog Outputs | 1 (0-10 V DC) |
| Relay Outputs | 1 (SPDT changeover contact) |
| Relay Rating AC | 250 V AC / 3 A |
| Relay Rating DC | 24 V DC / 2 A |
| Potentiometer Supply Output | 10 V DC |
| Auxiliary Supply Output | 20 V DC |
| Connection Type | Pluggable screw-clamp terminal strips |
Programming and Configuration
Configuring the Lenze E82ZAFSC001 requires setting both physical hardware switches on the module and software parameters within the host inverter controller. The onboard analog input supports 0–10 V voltage signals as well as 0–20 mA and 4–20 mA current loops, which are selected directly on the board using hardware DIP switches before inserting the module into the drive Function Interface slot.
System software integration and parameter verification are performed using Lenze Global Drive Control (GDC) software connected to the host drive, or through an attached Lenze E82ZBC Operating Module Keypad. Key diagnostic parameter codes include C0051 for real-time digital input status evaluation and C0034 for monitoring scaled analog input values, ensuring proper feedback integration during setup.
Diagnostics and Status Indication
The E82ZAFSC001 provides immediate visual feedback regarding operating state and fault conditions through dedicated LEDs mounted on the front face of the module. During normal startup and operational sequences, these indicators confirm established power and communication connection with the main 8200 vector or motec drive chassis.
Comprehensive system-level diagnostics are conducted through parameter monitoring via Lenze Global Drive Control (GDC) software or the E82ZBC keypad. Reading parameter C0051 allows technicians to verify digital input logic states directly, while parameter C0034 displays live analog input conversion values to isolate field wiring or sensor signal issues.
Status LED Indicators
| LED | Color/Status | Meaning |
|---|---|---|
| Ready / Status LED | Green - Solid | Lit solid green when function module is properly connected and operating under normal power/communication conditions with host drive |
| Fault / Error LED | Red - Solid or Flashing | Lit or blinking red when drive fault or module configuration error occurs; steady red indicates severe drive fault or initialization failure |
Replacement and Spare Part Considerations
When replacing an existing Lenze E82ZAFSC001 module, physical replacement is simplified by pluggable screw-clamp terminal strips. These wiring blocks detach directly from the board header, allowing the module to be removed and replaced without disconnecting individual field wires.
Before placing a replacement module into service, the hardware DIP switches on the new unit must be positioned to match the analog input signal type (0–10 V, 0–20 mA, or 4–20 mA) used by the original installation. Failing to set the DIP switches correctly can lead to improper speed reference scaling or drive fault conditions.
After mounting the spare unit into the drive Function Interface slot, verify parameter readings using the E82ZBC keypad or GDC software to ensure that digital enable signals and frequency reference commands are correctly processed before restarting automated operations.
Frequently Asked Questions
What frequency inverters are compatible with the Lenze E82ZAFSC001 module?
The module is compatible with Lenze 8200 vector and Lenze 8200 motec frequency inverters, plugging directly into the host drive Function Interface (FIF) slot.
How is the analog input configured on the E82ZAFSC001?
The 10-bit analog input is configured using onboard hardware DIP switches on the module, allowing selection between 0–10 V, 0–20 mA, and 4–20 mA input signals.
What do the status LEDs on the module indicate?
A solid green LED indicates proper connection and normal operation with the host drive. A solid or flashing red LED indicates an active drive fault or module configuration error.
What parameter codes can be used to monitor input status?
Signal status can be monitored using Lenze Global Drive Control (GDC) software or an E82ZBC keypad, using parameter C0051 for digital input status and parameter C0034 for analog input values.
Is field wiring required to be disconnected when swapping out this module?
No, the module features pluggable screw-clamp terminal strips that permit complete module removal without disconnecting individual wires from the terminal blocks.
Take advantage of our exchange formula
A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.
Play it safe with our warranty conditions
Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.
Data backup and recovery
Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.
Specific firmware and hardware versions
If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.
Disclaimer:
We are not an authorised distributor of Lenze.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.