Lenze EMF2174IB Global Drive Interbus Communication Module
Het item werd toegevoegd aan uw offerteaanvraag
Product Information
The Lenze EMF2174IB is an Interbus fieldbus communication module designed for the Lenze Global Drive family, including 8200 vector frequency inverters (E82EV series), 9300 series servo drives, and Drive PLC controllers. Functioning as an Interbus slave node operating under the standardized DriveCOM Profile 21 specification, this module enables drive parameterization, real-time motion control, and distributed speed control across high-speed automated conveyor systems, material handling, packaging machinery, textile manufacturing, and automotive manufacturing applications. Mounting directly into the host drive's front Function Interface (FIF) slot, the unit draws its required 5 V DC supply voltage at 0.17 A current directly from the host drive, eliminating external power wiring.
Network integration is managed through dual RS-422 9-pin D-sub connectors, featuring a female socket for incoming Remote Bus lines and a male plug for outgoing connections at a fixed 500 kbit/s transmission rate. Commissioning a replacement EMF2174IB module is straightforward because fieldbus profiles and drive parameters are stored in the non-volatile EEPROM memory of the host inverter. Installing a replacement unit does not require software re-flashing or parameter re-entry on the module itself. Field parameterization, diagnostic evaluation, and configuration transfer can be performed using Lenze Global Drive Control (GDC) software version 4.0 or higher, or via the Keypad XT (EMZ2101) operator panel. If you need assistance verifying module compatibility or sourcing a tested spare, ABC Industrial Parts can support your operational requirements.
The module features five front-panel status LEDs—CC/CR, BA, RD, TR, and FAIL/ERR—that provide immediate visual feedback regarding network connectivity, cyclic data exchange, remote bus segments, PCP parameter transfer, and internal hardware state. First-line troubleshooting for communication errors such as fault code CE0 or CE1 should begin by inspecting physical module seating in the FIF slot, checking for damaged connector pins, verifying Interbus cable integrity, and confirming master PLC operational status. Diagnostic parameters C0150 and C0151 can also be monitored via GDC or the Keypad XT diagnostic menu. When internal component failures or corrupt EEPROM conditions cause persistent FAIL/ERR indications or hardware faults like code CE3, field repair of the circuit board is not feasible, making module replacement or exchange through ABC Industrial Parts the effective path to restore production.
Technical Specifications
| Manufacturer | Lenze |
| Part Number | EMF2174IB |
| Model / Type | Communication Module Interbus (DriveCOM Profile 21) |
| Product Family | Global Drive |
| Fieldbus Protocol | Interbus |
| Drive Profile | DriveCOM Profile 21 |
| Baud Rate | 500 kbit/s |
| Supply Voltage | 5 V DC |
| Rated Current | 0.17 A |
| Host Mounting Interface | Function Interface Slot (FIF) |
| Fieldbus Interface IN | 9-pin D-sub socket (RS-422) |
| Fieldbus Interface OUT | 9-pin D-sub plug (RS-422) |
Programming and Configuration
The Lenze EMF2174IB relies on the parameter structure of the host drive and engineering tools for setup and monitoring. Engineering operations are performed using Lenze Global Drive Control (GDC) software version 4.0 or higher, or locally using the Keypad XT (EMZ2101) control module. Diagnostic parameters such as C0150 and C0151 allow maintenance personnel to inspect real-time communication status directly from the host unit's diagnostic interface.
DriveCOM Profile 21 compliance enables standardized parameter handling over the Interbus fieldbus network. Parameter channel process data (PCP) transfer allows real-time access to drive parameters directly from an Interbus master controller. Because all bus parameterization and node configurations are saved directly within the host inverter's non-volatile EEPROM memory, replacing an EMF2174IB unit requires no software re-flashing, allowing direct swap-in functionality during maintenance.
Communication and System Integration
The EMF2174IB communication module integrates Lenze Global Drive devices into Interbus fieldbus networks operating at a fixed 500 kbit/s baud rate. Designed for remote bus topologies, the module includes dual RS-422 9-pin D-sub ports: a female 9-pin D-sub socket for incoming network cables and a male 9-pin D-sub plug for outgoing bus connections. This configuration supports continuous fieldbus looping without requiring external active T-connectors.
Physical installation is completed by inserting the module into the host drive's dedicated Function Interface (FIF) slot. Power is supplied internally from the drive interface at 5 V DC with a rated current draw of 0.17 A. The unit functions as an Interbus slave, providing fast process data channels for dynamic motion control alongside PCP channels for comprehensive parameter transfer across Lenze 8200 vector inverters, 9300 servo drives, and Drive PLCs.
Diagnostics and Status Indication
System health and network status for the Lenze EMF2174IB are communicated via five diagnostic LEDs positioned on the module front panel. These LEDs provide real-time status for remote bus linkage, cyclic data exchange, remote bus segment control, PCP channel activity, and internal module faults. Visual indications allow technicians to quickly distinguish between external fieldbus line failures and module-level errors.
In addition to visual indicators, full network diagnostics are accessible through host drive diagnostic monitoring. Parameters C0150 and C0151 display live fieldbus communication status, while Interbus master diagnostic software and master diagnostic frames evaluate parameter channel transmission and frame validity across the network.
Status LED Indicators
| LED | Color/Status | Meaning |
|---|---|---|
| CC / CR | Cable Check / Remote Bus connection established and valid. | |
| BA | Bus Active - Interbus data transmission active. Flashing or off indicates missing master cyclic communication. | |
| RD | Remote Bus Disable - Remote bus segment behind module is disconnected or disabled. | |
| TR | Transmit / Receive - PCP communication active via parameter channel. | |
| FAIL / ERR | Internal module failure or communication timeout. If illuminated continuously alongside drive fault, indicates internal hardware error or module unresponsiveness requiring replacement. |
Replacement and Spare Part Considerations
When replacing a Lenze EMF2174IB Interbus module, match the exact part number to ensure total compatibility with the host drive and fieldbus network. Because configuration data is retained in the host drive's EEPROM rather than on the module itself, a replacement module can be installed directly into the host drive's FIF slot without downloading or reloading parameter sets.
Before putting a replacement unit into service, verify that the host drive is powered off and inspect the FIF slot pins for bends or contamination. Once installed, restore power and verify that the CC/CR LED illuminates to confirm valid Remote Bus connection, and that the BA LED indicates active cyclic data exchange with the Interbus master PLC.
Error Codes & Fault Codes
The following error codes may be displayed during operation or diagnostics:
| Code | Name | Description | Possible Cause | Recommended Action |
|---|---|---|---|---|
| CE0 | Communication Error 0 (FIF Fault) | Communication error between the host inverter and the plug-in function module EMF2174IB. | Module not seated properly, bent pin on FIF connector, defective EMF2174IB module, or extreme electromagnetic interference. | Check module seating; power cycle drive; check contacts. If fault persists, replace EMF2174IB module. |
| CE1 | Communication Error 1 (Interbus Time-out) | Process data monitoring time elapsed without valid Interbus frame reception. | Interbus cable disconnected, master PLC in STOP state, incorrect baud rate, bus line interruption. | Check Interbus cabling, connector locking, master PLC state, and host drive monitoring time setting. |
| CE2 | Communication Error 2 (PCP Channel Fault) | Error in PCP parameter channel transmission over Interbus. | Incorrect parameter index access, PCP telegram length mismatch, master parameter channel configuration error. | Verify DriveCOM PCP mapping in master project and parameter structure. |
| CE3 | Communication Error 3 (Module Hardware Fault) | Internal hardware initialize or memory check error on EMF2174IB module. | Internal component failure, corrupt module EEPROM, damaged FIF interface. | Internal hardware fault — return unit for repair or replace EMF2174IB module. |
Frequently Asked Questions
How is the Lenze EMF2174IB communication module installed in a host drive?
The EMF2174IB plugs directly into the Function Interface (FIF) slot on the front of compatible Lenze host drives, drawing its required 5 V DC operating power directly from the drive without external power wiring.
Does replacing an EMF2174IB module require reloading software or parameters?
No. Host drive parameters and fieldbus configuration settings are stored in the host drive's EEPROM memory. Replacing a damaged module with a spare EMF2174IB unit requires no software re-flashing or re-parameterization.
Which engineering software supports the EMF2174IB module?
The module is supported by Lenze Global Drive Control (GDC) software version 4.0 or higher, as well as the Keypad XT (EMZ2101) diagnostic unit.
What do the front LEDs on the EMF2174IB indicate during operation?
The five LEDs indicate Remote Bus connection validity (CC/CR), active Interbus data transmission (BA), remote bus disable status (RD), PCP channel activity (TR), and internal module hardware faults or timeouts (FAIL/ERR).
What causes fault code CE0 on the host drive?
Fault CE0 indicates a communication error between the host drive and the EMF2174IB module, typically caused by improper module seating in the FIF slot, bent connector pins, severe electromagnetic interference, or an internal module hardware defect.
Take advantage of our exchange formula
A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.
Play it safe with our warranty conditions
Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.
Data backup and recovery
Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.
Specific firmware and hardware versions
If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.
Disclaimer:
We are not an authorised distributor of Lenze.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.