Lenze 13221418 MCA13I08-RS0P1-B19N-ST5S00N-R0SU Asynchronous Servo Motor
Het item werd toegevoegd aan uw offerteaanvraag
Product Information
The Lenze 13221418 is a high-dynamic MCA series compact asynchronous servo motor identified by model code MCA13I08-RS0P1-B19N-ST5S00N-R0SU. Engineered for precise motion control in multi-axis packaging, textile, automotive, and material handling systems, this motor combines a low moment of inertia with rapid dynamic response. Constructed in a frame size 13 enclosure, it features an integrated forced ventilation blower fan designed to maintain high thermal dissipation and prevent thermal throttling during continuous, high-duty cycle industrial operation.
Interfacing with host drive systems is managed through Speedtec ST5 quick-connect plug connectors for motor power, resolver signals, and blower fan control. The unit incorporates a factory-installed spring-applied holding brake delivering 19 Nm holding torque (B19N) to retain loads securely during power shut-down or emergency stop conditions. Operating position feedback is supplied by a robust resolver system (RS0). When swapping out a damaged unit, motor configuration parameters are maintained within the associated Lenze servo inverter—such as the i700 or 9400 HighLine—allowing replacement units from ABC Industrial Parts to be integrated into existing setups using Lenze EASY Starter or Lenze Engineer software without manual recalibration.
System health and operational status are monitored indirectly through the host inverter and Lenze EASY Starter commissioning tools, which evaluate resolver feedback signals for position and velocity consistency. First-line troubleshooting for suspected motor failure should focus on verifying input power connections, checking Speedtec connector locking mechanisms, and confirming auxiliary power to the forced ventilation blower fan. Because internal winding shorts or mechanical damage cannot be serviced on the plant floor, acquiring a fully tested replacement or requesting repair options through ABC Industrial Parts provides a reliable path back to full production.
Technical Specifications
| Manufacturer | Lenze |
| Part Number | 13221418 |
| Model / Type | MCA13I08-RS0P1-B19N-ST5S00N-R0SU |
| Component Type | Compact Asynchronous Servo Motor |
| Product Family | MCA Series |
| Frame Size | 13 |
| Cooling Method | Forced Ventilation |
| Feedback System | Resolver (RS0) |
| Holding Brake Torque | 19 Nm |
| Connector Type | Speedtec ST5 |
Programming and Configuration
Configuration and parameterization for the Lenze 13221418 MCA series motor are handled directly within the connected Lenze servo inverter environment. Using Lenze EASY Starter software or the Lenze Engineer commissioning suite, operators can access complete motor profiles and drive tuning routines tailored to the specific mechanical axis.
Because motor parameter files are stored inside the host inverter configuration, installing a new or replacement MCA13I08 motor does not require re-programming the motor unit itself. Uploading the existing parameter set from the drive controller restores correct feedback alignment, brake control routines, and thermal monitoring parameters automatically.
Communication and System Integration
The Lenze 13221418 servo motor interfaces with industrial motion networks through compatible Lenze drive inverters, including the i700 and 9400 HighLine series. All physical electrical connections employ Speedtec ST5 quick-connect plug interfaces, ensuring IP-rated, vibration-resistant power, feedback, and auxiliary cooling connections.
Position and speed signals are transmitted to the host inverter using the built-in RS0 resolver feedback system. The resolver provides steady signal transmission resistant to high electrical noise and mechanical vibration, facilitating integration into multi-axis dynamic positioning networks.
Diagnostics and Status Indication
Diagnostic evaluation for the MCA13I08-RS0P1-B19N-ST5S00N-R0SU is conducted through the connected Lenze servo inverter rather than on-motor displays. Live drive status, position feedback integrity, and operational alarms can be monitored using Lenze EASY Starter software connected to the drive interface.
The host inverter continuously monitors the resolver RS0 feedback signals to detect phase loss, position deviation, or speed discrepancies. Auxiliary cooling operational checks ensure that active forced ventilation is active during continuous heavy load duty cycles.
Replacement and Spare Part Considerations
When replacing an existing Lenze 13221418 unit, confirm that the full order designation MCA13I08-RS0P1-B19N-ST5S00N-R0SU matches the original motor tag. Crucial hardware options include the size 13 frame, forced ventilation blower system, RS0 resolver feedback type, 19 Nm holding brake (B19N), and Speedtec ST5 connector configuration.
Prior to placing a replacement motor into service, verify that all Speedtec ST5 plug connectors are firmly locked into position and that the forced ventilation fan receives proper auxiliary power. Ensure the host drive inverter parameter file is backed up and re-applied to align drive settings with the replacement unit.
Frequently Asked Questions
What feedback device is integrated into the Lenze 13221418 servo motor?
The Lenze 13221418 motor is equipped with an RS0 precision resolver system that transmits position and speed feedback to the host servo inverter.
Which software tools are used to configure the MCA13I08 motor?
Commissioning and parameterization are performed using Lenze EASY Starter software or the Lenze Engineer commissioning suite through the host Lenze servo inverter.
What cooling method does this motor use?
The motor utilizes active forced ventilation via an integrated cooling fan blower to maintain optimal operating temperatures under heavy duty cycles.
What type of connection interface is used on the motor?
Electrical wiring for power, resolver feedback, and blower fan power is connected via Speedtec ST5 quick-connect plug connectors.
Does the motor feature an integrated holding brake?
Yes, the motor includes a factory-installed spring-applied holding brake specified for 19 Nm holding torque (B19N).
Which Lenze drives are compatible with this motor?
The MCA13I08 servo motor is designed to operate with Lenze servo inverters, such as the i700 and 9400 HighLine series.
Take advantage of our exchange formula
A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.
Play it safe with our warranty conditions
Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.
Data backup and recovery
Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.
Specific firmware and hardware versions
If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.
Disclaimer:
We are not an authorised distributor of Lenze.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.