Lenze 15042360 MCS06I60-RS0P1-B11N-ST5S00N-R0SU Synchronous Servo Motor
Het item werd toegevoegd aan uw offerteaanvraag
Product Information
The Lenze 15042360 (model MCS06I60-RS0P1-B11N-ST5S00N-R0SU) is a high-dynamic synchronous servo motor designed for precise motion control applications within automated industrial machinery. Belonging to the Lenze MCS product family in frame size 06, this 6-pole motor delivers a rated speed of 6000 rpm, a standstill torque of 1.8 Nm, a rated torque of 1.4 Nm, and a peak torque capacity of 8.5 Nm. Electrical operation is characterized by a rated current of 2.2 A and a standstill current of 2.6 A. The unit is fitted with an integrated 24V DC holding brake rated for 2.5 Nm of holding torque to secure loads during power-off or fault conditions. An IP65-rated enclosure protects internal components against dust ingress and water jets in demanding operating environments.
Connecting a replacement unit into an existing machine interface requires matching the motor's power and signal connections. The 15042360 features SpeedTec ST5 quick-connect plugs for both power supply and feedback signals, accommodating standardized ST5 M23 cable assemblies. Position feedback is provided by an integrated 2-pole resolver (RS0), which communicates rotor position directly to connected drive controllers, including Lenze 9400, 8400, and i700 series servo drives. Commissioning a replacement unit requires configuring the drive controller with the motor identity and feedback settings using Lenze EASY Starter or Lenze Engineer software. Technical specialists at ABC Industrial Parts can support maintenance teams in selecting compatible spare units and verifying drive configuration parameters prior to installation.
Ongoing diagnostic monitoring relies on internal sensors and connected drive electronics. The motor contains an integrated KTY or PT1000 thermal sensor embedded within the stator winding, continually signaling thermal conditions to the servo drive to trigger overtemperature protection before damage occurs. The drive controller continuously monitors the resolver sine and cosine signals to detect wire breakages, phase errors, or signal loss, while real-time operating parameters such as current draw and position values can be observed using Lenze EASY Starter. If a motor fails due to mechanical wear, winding insulation breakdown, or internal feedback damage, physical field repairs are rarely feasible, and sourcing a tested replacement or reconditioned exchange unit through ABC Industrial Parts provides a direct route to restoring production.
Technical Specifications
| Manufacturer | Lenze |
| Part Number | 15042360 |
| Model / Type | MCS06I60-RS0P1-B11N-ST5S00N-R0SU |
| Component Type | Synchronous Servo Motor |
| Product Family | MCS Series |
| Frame Size | Frame 06 |
| Rated Speed | 6000 rpm |
| Maximum Speed | 6000 rpm |
| Rated Torque | 1.4 Nm |
| Standstill Torque | 1.8 Nm |
| Peak Torque | 8.5 Nm |
| Rated Current | 2.2 A |
| Standstill Current | 2.6 A |
| Number of Poles | 6 |
| Holding Brake Voltage | 24V DC |
| Holding Brake Torque | 2.5 Nm |
| Feedback Device | 2-Pole Resolver (RS0) |
| Thermal Protection | Integrated KTY / PT1000 Sensor |
| Protection Rating | IP65 |
| Electrical Connections | SpeedTec ST5 M23 Connectors |
Programming and Configuration
Configuration of the Lenze 15042360 servo motor is carried out through the connected drive inverter using Lenze software tools, such as Lenze EASY Starter or Lenze Engineer. Motor electronic data, resolver alignment settings, and current limits must be assigned within the inverter's parameter table to ensure correct commutation and optimal dynamic control.
When replacing an existing unit, technicians must ensure that the drive parameters match the specific electrical and mechanical ratings of the MCS06I60-RS0P1-B11N model, including its 6-pole construction, 6000 rpm maximum speed, and 2.2 A rated current. Utilizing pre-saved parameter files from Lenze EASY Starter allows fast parameter download and minimizes machine downtime during replacement.
Communication and System Integration
The Lenze 15042360 servo motor interfaces with system controllers via compatible Lenze servo inverters, including the 9400 Series, 8400 Series, and i700 Series. Physical power and feedback lines connect directly to the inverter drive modules, which handle the main fieldbus network communication to the higher-level PLC.
Wiring is simplified through the use of integrated SpeedTec ST5 quick-connect plugs. These connectors accommodate standard SpeedTec ST5 M23 cable assemblies for power supply and signal transfer, enabling fast, secure, turn-and-lock connections that eliminate wiring errors and protect terminal contacts against environmental contaminants.
Diagnostics and Status Indication
System state monitoring for the 15042360 relies on feedback mechanisms built into the motor and evaluated by the connected servo drive. Thermal management is handled by an integrated KTY or PT1000 temperature sensor inside the stator winding, which continuously relays thermal readings to the drive module to enable software-driven overtemperature protection.
The 2-pole resolver (RS0) continuously supplies sine and cosine signals to the inverter. Drive-level diagnostic software detects phase imbalances, wire breakages, or signal loss from the feedback circuit. In addition, real-time operating data including current draw, calculated torque, motor speed, and error history can be actively monitored via Lenze EASY Starter during maintenance routines.
Replacement and Spare Part Considerations
Replacing a Lenze 15042360 motor requires ordering the exact model designation MCS06I60-RS0P1-B11N-ST5S00N-R0SU to ensure total mechanical and electrical interchangeability. Frame size 06 mounting dimensions, shaft diameter, SpeedTec ST5 connector orientation, and holding brake specifications must match the original installation.
Before restoring power to a newly installed replacement motor, verify that the 24V DC holding brake power supply is functional and properly wired to release the 2.5 Nm brake. Cable connections must be fully locked, and the drive inverter parameter set must be checked using Lenze EASY Starter to confirm that the resolver feedback type (RS0) and thermal monitoring profiles match the replacement motor.
Frequently Asked Questions
Which Lenze servo drives are compatible with the 15042360 servo motor?
The Lenze 15042360 synchronous servo motor is fully compatible with Lenze Servo Inverter 9400 Series, Lenze Servo Drive 8400 Series, and Lenze Servo Drives i700.
Does the Lenze MCS06I60-RS0P1-B11N motor include a holding brake?
Yes, this motor includes an integrated 24V DC holding brake that provides a holding torque of 2.5 Nm to secure loads during standstill or unpowered conditions.
What type of feedback device is installed in this motor?
The motor features an integrated 2-pole resolver (RS0) for position feedback, along with an embedded KTY / PT1000 thermal sensor inside the winding for temperature evaluation.
What connector system is used for electrical connections?
Electrical connections for power and feedback signals use SpeedTec ST5 quick-connect plugs, designed for use with SpeedTec ST5 M23 cable assemblies.
What software tool is used to monitor and configure the motor drive settings?
Motor parameters, real-time current, speed, position, and diagnostic states can be configured and monitored using Lenze EASY Starter or Lenze Engineer software.
Take advantage of our exchange formula
A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.
Play it safe with our warranty conditions
Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.
Data backup and recovery
Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.
Specific firmware and hardware versions
If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.
Disclaimer:
We are not an authorised distributor of Lenze.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.