Lenze 15050232 MCS12H35-RS0P1-A19N-ST5S00N-R0SU Synchronous Servo Motor
Het item werd toegevoegd aan uw offerteaanvraag
Product Information
The Lenze 15050232 is a high-dynamic synchronous AC servo motor within the Lenze MCS product family, designated under the full model code MCS12H35-RS0P1-A19N-ST5S00N-R0SU. Designed in Frame Size 12, this industrial motion component operates at a rated speed of 3500 rpm, delivering a continuous rated torque of 11.5 Nm and a stall torque of 14.5 Nm. Built to accommodate high overload demands during rapid acceleration cycles, the motor delivers a peak torque output up to 54 Nm. An IP65 protection rating provides durable housing performance against environmental contaminants such as dust and water spray in automated production environments.
Electrical connections for power and signal lines are established via quick-locking SpeedTec M23 circular connectors (ST5 option), facilitating efficient connection and secure retention. Continuous position tracking and speed control are provided by an integrated 2-pole resolver (RS0). The unit is designed for direct pairing with Lenze drive infrastructure, including Lenze 9400 Servo Drives and Lenze Servo-Inverter i700 units. Placing a replacement motor into service requires parameter alignment and resolver calibration through Lenze EASY Starter or Lenze Engineer software. For maintenance teams managing replacement schedules or axis overhauls, ABC Industrial Parts provides tested replacement units and expert technical support.
Operational diagnostics and thermal safety are maintained through an integrated thermal winding sensor connected directly to the supervisory servo drive. The drive monitors motor condition and handles protection against resolver fault conditions, overtemperature trips, and overcurrent events. When field troubleshooting an axis trip, initial checks should focus on SpeedTec cable latching, power conductor continuity, and mechanical drive train freedom. In cases involving internal winding faults or mechanical wear beyond field service, unit replacement or professional repair through ABC Industrial Parts ensures a reliable return to operational duty.
Technical Specifications
| Manufacturer | Lenze |
| Part Number | 15050232 |
| Model / Type | MCS12H35-RS0P1-A19N-ST5S00N-R0SU |
| Product Family | MCS |
| Component Type | Synchronous Servo Motor |
| Rated Speed | 3500 rpm |
| Rated Torque | 11.5 Nm |
| Stall Torque | 14.5 Nm |
| Peak Torque | 54 Nm |
| Rated Current | 9 A |
| Stall Current | 11 A |
| Peak Current | 51 A |
| Protection Rating | IP65 |
| Power Connection | SpeedTec M23 circular plug (ST5) |
| Feedback Device | 2-pole resolver (RS0) |
Programming and Configuration
System integration and parameter setup for the Lenze 15050232 motor are conducted through the host servo inverter engineering interface. Using Lenze EASY Starter or Lenze Engineer commissioning software, operators configure operational parameters, maximum current thresholds, and velocity loop feedback settings.
When commissioning a replacement motor, software execution of motor parameter identification and resolver alignment is necessary. This aligns the 2-pole resolver (RS0) feedback signal with the electrical angle of the stator to guarantee accurate torque production and avoid drive trip conditions.
Communication and System Integration
The MCS12H35-RS0P1-A19N-ST5S00N-R0SU utilizes SpeedTec M23 circular connector plugs (ST5 option) for quick-locking electrical interfacing. This connector system provides fast, turn-lock connection for power conductors and resolver feedback cabling, resisting vibration during high dynamic positioning.
Feedback integration is designed specifically for Lenze drive controllers, including the 9400 Servo Drive range and Servo-Inverter i700 series. The integrated 2-pole resolver supplies accurate position information back to the drive's internal control loops.
Diagnostics and Status Indication
Thermal monitoring for the motor is accomplished via an embedded thermal sensor located within the stator windings. The sensor continuously provides winding temperature data to the connected drive, enabling automated trip responses prior to thermal overload.
Fault indications are processed and displayed by the paired servo drive. Diagnostic routines monitor for conditions such as resolver signal loss or noise, winding overtemperature alerts, and peak overcurrent events during axis movement.
Replacement and Spare Part Considerations
When selecting a spare or replacement unit, match the complete designation MCS12H35-RS0P1-A19N-ST5S00N-R0SU. Specific variations in frame size, connector style (ST5 SpeedTec M23), or resolver selection (RS0) must be identical to maintain physical and electrical compatibility with existing cabling.
Before applying power to a replacement unit, confirm that mechanical coupling is secure and perform the software-based resolver alignment in Lenze EASY Starter or Lenze Engineer. Correct parameter loading ensures optimal torque response and protects connected mechanical hardware.
Frequently Asked Questions
Which software tools are required to configure the Lenze 15050232 motor?
Commissioning, parameter setup, and resolver alignment are performed using Lenze EASY Starter or Lenze Engineer software through the connected drive.
What connector system is standard on the Lenze 15050232?
The motor features quick-locking SpeedTec M23 circular connectors (ST5 option) for both power connections and feedback lines.
Which Lenze drive series are compatible with this motor?
The motor is compatible with Lenze motion control drives, including Lenze 9400 Servo Drives and Lenze Servo-Inverter i700 units.
What feedback device is fitted inside the motor?
Position and speed feedback are provided by an integrated 2-pole resolver (RS0).
What is the IP protection rating of this motor?
The motor housing carries an IP65 protection rating against dust and low-pressure water streams.
Take advantage of our exchange formula
A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.
Play it safe with our warranty conditions
Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.
Data backup and recovery
Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.
Specific firmware and hardware versions
If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.
Disclaimer:
We are not an authorised distributor of Lenze.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.