Lenze MCM06C30-SKMF1 Compact Synchronous Servo Motor
Het item werd toegevoegd aan uw offerteaanvraag
Product Information
The Lenze MCM06C30-SKMF1 is a compact synchronous servo motor from the Lenze m850 family and MCM Series, engineered for precise, high-dynamic motion control in industrial automation. Operating at a rated output of 0.19 kW and a rated speed of 3000 rpm, this 6-pole motor generates a continuous rated torque of 0.6 Nm and a standstill torque of 0.65 Nm at a rated current of 1.3 A. Built with an optimized inertia ratio and high power density, the unit provides a peak torque capability of up to 2.6 Nm to handle dynamic acceleration cycles and transient loads in demanding applications such as high-speed pick-and-place systems, packaging machines, and automated assembly indexing tables.
Electrical integration is handled via an ICN M23 SpeedTec-compatible plug connection that combines motor power lines, thermal sensor monitoring, and feedback signals for resolvers or encoders into a single secure connector. Replacing an existing motor involves mounting the unit and connecting the M23 SpeedTec plug. An integrated electronic nameplate enables the paired servo drive—such as a Lenze i700, i950, 9400 TopLine, or 8400 TopLine servo inverter—to read motor parameters automatically through Lenze EASY Starter software, minimizing manual setup and preventing configuration errors. Technical support from ABC Industrial Parts can assist when verifying motor drive alignment or restoring motion axis parameters.
Diagnostic oversight is provided through the connected Lenze servo drive, which monitors encoder signal phase and pulse counts alongside motor thermal conditions using embedded KTY, PT1000, or TP110 temperature sensors. First-line troubleshooting for suspected motion issues should include checking the seating and locking of the M23 SpeedTec connector, inspecting motor power cabling, and confirming drive parameter recognition via Lenze EASY Starter. Internal mechanical wear, winding breakdown, or encoder failure cannot be repaired on the machine floor; replacing the faulty motor with a fully tested spare from ABC Industrial Parts offers the quickest path to restoring production uptime.
Technical Specifications
| Manufacturer | Lenze |
| Part Number | MCM06C30-SKMF1 |
| Component Type | Compact Synchronous Servo Motor |
| Product Family / Series | m850 / MCM Series |
| Rated Power | 0.19 kW |
| Rated Torque | 0.6 Nm |
| Standstill Torque | 0.65 Nm |
| Peak Torque | 2.6 Nm |
| Rated Speed | 3000 rpm |
| Rated Current | 1.3 A |
| Number of Poles | 6 |
| Connection Type | ICN M23 SpeedTec Connector |
Programming and Configuration
Parameterization for the Lenze MCM06C30-SKMF1 is facilitated by an integrated electronic nameplate embedded within the motor assembly. When connected to a compatible Lenze servo drive, the motor automatically transmits critical operational values—including electrical current limits, rated torque, speed ratings, and thermal parameters—directly to the drive system.
Engineering and axis commissioning are managed using Lenze EASY Starter software. Through this tool, maintenance technicians can inspect motor identification data, verify drive control loops, and confirm thermal sensor parameters without needing to perform manual parameter entry into the drive configuration file.
Communication and System Integration
Physical connection to the Lenze MCM06C30-SKMF1 relies on an ICN M23 SpeedTec connector. This unified interface routes three-phase motor power lines, thermal sensor monitoring circuits, and feedback signals for encoders or resolvers through a single twist-lock housing, reducing wiring errors and simplifying machine installation.
The motor is engineered for direct pairing with Lenze motion controllers and drive systems, including Lenze i700 Servo Inverters, i950 Servo Inverters, 9400 TopLine Servo Drives, and 8400 TopLine Inverters. This drive integration allows synchronized control across multi-axis automated machinery.
Diagnostics and Status Indication
Diagnostic monitoring for the MCM06C30-SKMF1 servo motor is executed by the connected Lenze servo drive rather than onboard motor indicators. Embedded thermal sensors supporting KTY, PT1000, or TP110 configurations send continuous temperature data back to the drive to prevent thermal overloading of the motor windings.
The drive actively evaluates feedback signals to monitor phase alignment and pulse count integrity from the encoder or resolver. Detailed diagnostic messages, operational values, and trip history are accessed directly via Lenze EASY Starter software through the host inverter interface.
Replacement and Spare Part Considerations
When replacing a Lenze MCM06C30-SKMF1 servo motor, ensure that the part number matches precisely to maintain compatibility with existing shaft fittings, feedback evaluation, and power cabling. The 0.19 kW rating and peak torque profile of 2.6 Nm are matched to specific mechanical drive dynamics.
Before restoring power after a replacement, check that the ICN M23 SpeedTec plug is fully seated and clean. Upon powering up the connected Lenze i700, i950, 9400 TopLine, or 8400 TopLine inverter, use Lenze EASY Starter software to verify that the electronic nameplate parameters have been correctly recognized by the drive.
Frequently Asked Questions
What are the core performance specifications of the Lenze MCM06C30-SKMF1?
The motor provides a rated output of 0.19 kW at 3000 rpm, delivering 0.6 Nm rated torque, 0.65 Nm standstill torque, and 2.6 Nm peak torque at a rated current of 1.3 A.
How is the motor electrically connected to the servo drive?
Connections are made via an ICN M23 SpeedTec connector that consolidates power, feedback signals, and thermal sensor monitoring into a single quick-locking plug.
Which Lenze servo drives are compatible with this motor?
The MCM06C30-SKMF1 is natively compatible with Lenze i700 Servo Inverters, Lenze i950 Servo Inverters, Lenze 9400 TopLine Servo Drives, and Lenze 8400 TopLine Inverters.
How are motor parameters loaded into a replacement drive?
An integrated electronic nameplate automatically transfers motor identification and configuration data to the connected Lenze drive via Lenze EASY Starter software upon connection.
What thermal protection sensors are embedded in the motor?
The motor supports thermal monitoring using KTY, PT1000, or TP110 temperature sensor signals evaluated by the connected servo drive.
Take advantage of our exchange formula
A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.
Play it safe with our warranty conditions
Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.
Data backup and recovery
Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.
Specific firmware and hardware versions
If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.
Disclaimer:
We are not an authorised distributor of Lenze.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.