Lenze EWL0070 Diagnoseleiding Diagnostic Cable
Het item werd toegevoegd aan uw offerteaanvraag
Product Information
The Lenze EWL0070 Diagnoseleiding is a 2.5-meter drive diagnostic cable designed to connect PC engineering tools to Lenze frequency inverters and servo drives. Belonging to the Lenze Accessories product family, this specialized connection line features a standard 9-pin Sub-D female connector on the host end and a dedicated Lenze drive diagnostic plug on the device side. Its fixed 2.5-meter length provides practical reach for service personnel working inside control cabinets across factory automation, material handling, packaging, and textile machinery environments.
Connecting via RS232 serial communication, the EWL0070 acts as the physical link between drive diagnostic ports and diagnostic adapters such as the Lenze EMF2171IB, EMF2173IB, or EMF2177IB. It supports a wide range of hardware platforms, including Lenze 8200 vector, 8200 motec, 9300 vector, and 9300 servo drives, as well as Lenze Drive PLC units. When commissioning or servicing a drive, technicians utilize this cable with engineering software like Lenze Global Drive Control (GDC) or Lenze EASY Navigator to transfer parameter sets, restore system backups, and configure operational settings. ABC Industrial Parts can assist in sourcing compatible diagnostic hardware and cables to ensure smooth system integration.
During routine maintenance or active troubleshooting, the EWL0070 enables real-time drive status monitoring and full access to internal fault memories via connected LECOM diagnostic adapters. Because the cable relies on dedicated keying and pre-wired pinouts, it avoids wiring mistakes during field parameterization. Physical damage to the cable conductors or connectors will result in serial communication loss, preventing parameter uploads or real-time diagnostic readings. Replacing a damaged diagnostic cable restores direct PC interface access, allowing maintenance personnel to diagnose drive faults and verify operational status quickly.
Technical Specifications
| Manufacturer | Lenze |
| Part Number | EWL0070 |
| Model / Type | Diagnoseleiding |
| Component Type | Diagnostic Cable |
| Product Family | Lenze Accessories |
| Cable Length | 2.5 m |
| Host / Adapter Connector | 9-Pin Sub-D Female |
| Drive Connector | Lenze Drive Diagnostic Plug |
| Supported Interface Protocol | RS232 Serial |
Programming and Configuration
The Lenze EWL0070 diagnostic cable serves as the main physical communication channel during drive setup and parameterization. Used alongside Lenze Global Drive Control (GDC) software or Lenze EASY Navigator, the cable allows service technicians to upload, modify, and store drive parameters on PC workstations.
This cable enables parameter set backup and restoration operations across production lines. By establishing a stable connection to Lenze 8200 vector, 8200 motec, 9300 vector, 9300 servo, or Drive PLC devices, technicians can clone operational configurations or transfer stored parameters into replacement drive units during field maintenance.
Communication and System Integration
The EWL0070 is designed around an RS232 serial interface protocol. The 9-pin Sub-D female connector links directly to LECOM diagnostic adapters—including model variants EMF2171IB, EMF2173IB, and EMF2177IB—which then interface with the host PC system.
On the drive side, the custom Lenze diagnostic plug connects directly into factory diagnostic sockets. This plug-and-play pin configuration ensures correct physical connection and reliable data transmission across automated control environments without requiring custom field wiring.
Diagnostics and Status Indication
Diagnostics with the Lenze EWL0070 rely on software-based analysis tools rather than physical LED displays on the cable itself. When connected via a supported LECOM adapter, the cable enables real-time drive status monitoring and live data reading within Lenze Global Drive Control (GDC).
Technicians use this setup to read internal fault logs, evaluate live operating variables, and diagnose active drive errors on supported 8200, 9300, and Drive PLC platforms.
Replacement and Spare Part Considerations
When replacing a Lenze EWL0070 cable, verify that the physical connectors match the existing installation: a 9-pin Sub-D female plug for adapter attachment and the dedicated Lenze diagnostic plug for insertion into the drive socket.
Replacing a faulty diagnostic cable requires no firmware installation or parameter changes on the cable itself. Having a functional EWL0070 on hand is essential for field service teams to perform backup restores and troubleshooting whenever a drive unit requires maintenance or replacement.
Frequently Asked Questions
What is the primary function of the Lenze EWL0070 cable?
The Lenze EWL0070 is a 2.5-meter diagnostic cable designed to connect PC diagnostic adapters to Lenze frequency inverters and servo drives for commissioning, parameter configuration, and troubleshooting.
Which Lenze drive series are compatible with the EWL0070?
The EWL0070 diagnostic cable is compatible with Lenze 8200 vector, 8200 motec, 9300 vector, 9300 servo drives, and Lenze Drive PLC units.
Which diagnostic software tools work with the EWL0070 cable?
The cable supports PC-based drive diagnostics and parameterization using Lenze Global Drive Control (GDC) software and Lenze EASY Navigator.
What diagnostic adapters are required to use this cable?
The EWL0070 features a 9-pin Sub-D female connector that attaches to Lenze LECOM diagnostic adapters, including the EMF2171IB, EMF2173IB, and EMF2177IB.
Does the EWL0070 cable require any driver software or configuration itself?
No, the EWL0070 is a passive diagnostic connection cable. It requires no software installation or internal configuration itself, though host software like Lenze GDC is used on the connected PC.
Take advantage of our exchange formula
A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.
Play it safe with our warranty conditions
Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.
Data backup and recovery
Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.
Specific firmware and hardware versions
If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.
Disclaimer:
We are not an authorised distributor of Lenze.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.