Lenze EYF0019A0050F02S03 Encoder System Cable 5m
Het item werd toegevoegd aan uw offerteaanvraag
Product Information
The Lenze EYF0019A0050F02S03 is a pre-assembled encoder system cable engineered for reliable feedback signal transmission between Lenze servo motors and drive controllers. Belonging to the Lenze EYF System Cables product family, this 5-meter feedback cable assembly provides the link required to transfer precise position and velocity data in closed-loop motion control systems. Constructed with a flexible outer jacket, it is specifically designed to withstand continuous flexing in drag chain and dynamic cable carrier installations across packaging, material handling, and automated manufacturing lines.
Interfacing with machinery requires connecting the drive-side Sub-D 15-pin connector directly into the feedback port of a compatible Lenze drive controller, while the motor side utilizes an M23 circular 12-pin connector that mates securely to the motor feedback socket. Commissioning a replacement cable involves powering down the system, unrouting the worn assembly from the dynamic cable carrier, and carefully pulling the new cable into place while respecting proper bend radii. While passive cables do not store internal parameters or firmware, swapping out damaged wiring requires verifying correct connector pin alignment and robust terminal seating to ensure reliable communication. Expert support from ABC Industrial Parts can assist in sourcing genuine replacement cabling to match exact physical dimensions and fieldbus drive interfaces.
In demanding multi-axis servo applications, physical wear inside dynamic cable carriers or severe electromagnetic interference can degrade encoder signals, causing intermittent position feedback errors or drive trips. When troubleshooting motion control faults, inspecting the cable jacket for outer abrasion, checking pin continuity, and ensuring the full braid shielding is properly connected to ground are critical initial checks. Internal conductor fractures caused by fatigue cannot be serviced in the field, making immediate replacement with a fully tested spare unit from ABC Industrial Parts the most reliable path back to full operational productivity.
Technical Specifications
| Manufacturer | Lenze |
| Part Number | EYF0019A0050F02S03 |
| Model / Type | System Cable For Encoder Connection |
| Component Type | Encoder Cable Assembly |
| Product Family | EYF System Cables |
| Cable Length | 5 m |
| Shielding | Fully Shielded |
| Drag Chain Suitable | Yes |
| Drive-Side Interface | Sub-D 15-pin |
| Motor-Side Interface | M23 Circular 12-pin |
Communication and System Integration
The EYF0019A0050F02S03 cable features a dual-ended connector layout optimized for direct integration between Lenze drive controllers and servo motors. The motor end is equipped with an M23 circular 12-pin connector, providing a secure threaded coupling to protect feedback contacts against industrial vibration and environmental exposure. The drive end terminates in a 15-pin Sub-D connector configured for direct attachment to the encoder feedback port on the drive controller.
To preserve signal integrity in noisy electrical environments, the assembly incorporates full overall braid shielding. This EMC-compliant shielding safeguards low-voltage position and velocity feedback signals against high-frequency electromagnetic interference generated by adjacent power cables and variable frequency drives, ensuring consistent closed-loop motor control.
Replacement and Spare Part Considerations
When replacing an existing encoder feedback cable, verify that the cable length, pin configuration, and connector styles match the installed drive and motor interfaces. The EYF0019A0050F02S03 provides a standard 5-meter nominal length and connects systems using 15-pin Sub-D drive ports and 12-pin M23 motor feedback sockets.
When routing the replacement assembly through dynamic cable carriers or drag chains, ensure smooth alignment without twisting the core, maintaining minimum bend radii along the entire carrier length. Ensure both the locking screws on the Sub-D connector and the threaded collar on the M23 circular plug are fully secured to maintain continuous shield grounding and prevent signal loss during continuous machine movement.
Frequently Asked Questions
What connectors are fitted on the Lenze EYF0019A0050F02S03 cable?
The cable is factory-terminated with a 15-pin Sub-D connector on the drive controller side and a 12-pin M23 circular connector on the servo motor side.
Is the EYF0019A0050F02S03 cable suitable for drag chain applications?
Yes, this cable assembly features high-flexibility jacketing designed specifically for continuous motion inside dynamic drag chains and cable carriers.
What is the total length of the Lenze EYF0019A0050F02S03 cable?
The nominal length of this pre-assembled encoder system cable is 5 meters.
Does this encoder cable require software parameter setup or configuration?
No, the cable is a passive connection component. However, physical installation requires proper routing, correct connector pin alignment, and secure mating on both ends.
Why is full shielding important for the EYF0019A0050F02S03 cable?
Full shielding provides crucial EMC protection, shielding low-voltage feedback signals from electromagnetic noise produced by power leads and drive controllers.
Take advantage of our exchange formula
A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.
Play it safe with our warranty conditions
Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.
Data backup and recovery
Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.
Specific firmware and hardware versions
If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.
Disclaimer:
We are not an authorised distributor of Lenze.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.