Lenze EYP0010A0050M01A00 Encoder System Cable
Het item werd toegevoegd aan uw offerteaanvraag
Product Information
The Lenze EYP0010A0050M01A00 is a factory pre-assembled encoder feedback system cable belonging to the Lenze System Cables family. Designed as a reliable interconnect for motion control systems, this cable spans 5.0 meters in length and transfers position and speed signals between motor feedback devices and drive evaluation units. Constructed with a flexible jacket built for dynamic moving environments and full metallic shielding for noise suppression, this assembly supports dependable operation across packaging machinery, material handling, automotive manufacturing, and automated robotics.
Physical termination includes a heavy-duty 12-pin M23 circular female connector on the motor side and a standard 9-pin Sub-D male connector on the drive side. This dual-ended configuration connects Lenze servo motors featuring M23 feedback sockets directly to Lenze servo inverters equipped with Sub-D encoder evaluation ports. Replacing a worn cable is straightforward due to the pre-terminated factory design, though technicians should ensure connectors are cleanly seated, threaded tight, and properly strain-relieved inside cable carriers. Technicians sourcing replacement assemblies through ABC Industrial Parts can eliminate field wiring mistakes and reduce machinery downtime during maintenance.
Because feedback cables operating inside continuous-flex drag chains undergo constant movement, common issues stem from conductor fatigue, shielding wear, or mechanical looseness at the connector ends. First-line troubleshooting involves inspecting the outer jacket for pinching, checking the M23 locking ring for tight engagement, and verifying that the 9-pin Sub-D connector is securely fastened to the inverter port. Physical wire damage or internal intermittent open circuits cannot be repaired in the field and require replacing the complete cable harness. In these situations, obtaining a tested replacement from ABC Industrial Parts offers a fast and secure route to restoring accurate encoder feedback to production machinery.
Technical Specifications
| Manufacturer | Lenze |
| Part Number | EYP0010A0050M01A00 |
| Component Type | Encoder Cable |
| Product Family | Lenze System Cables |
| Cable Length | 5.0 m |
| Drag Chain Rated | Yes |
| Shielding | Fully Shielded |
| Motor-Side Connector | M23 Circular (12-pin Female Socket) |
| Drive-Side Connector | Sub-D (9-pin Male) |
Communication and System Integration
The Lenze EYP0010A0050M01A00 system cable provides direct signal routing between feedback devices and drive controllers using dedicated connector interfaces. On the motor end, an industrial M23 12-pin female socket provides a secure, vibration-resistant connection to encoder or resolver interfaces. The opposing end features a 9-pin male Sub-D connector engineered for direct insertion into 9-pin feedback evaluation ports on Lenze servo drives.
To ensure signal integrity in electrically noisy industrial automation environments, the cable is equipped with continuous high-density metallic shielding. This shielding protects sensitive encoder and position feedback signals against electromagnetic interference generated by surrounding motor power leads or variable frequency drives. Additionally, the outer jacket and conductor layout are rated for dynamic drag chain operation, maintaining electrical performance throughout repeated flex cycles in moving machinery.
Replacement and Spare Part Considerations
When substituting an encoder feedback cable on a Lenze motion system, matching both interface styles and cable parameters is required. The EYP0010A0050M01A00 is tailored for systems utilizing Lenze servo motors with M23 12-pin feedback connections and Lenze servo drives with Sub-D 9-pin evaluation interfaces. Verifying the exact part number ensures the proper 5.0-meter length and correct pin assignment, preventing position evaluation errors or drive fault conditions.
Replacing a damaged cable with a factory pre-assembled unit eliminates the risks associated with manual wire stripping, crimping, or soldering in the field. When installing the replacement within a cable carrier, maintenance personnel must ensure adequate bending radii, avoid twisting the cable along its axis, and confirm proper strain relief at both connector entry points to preserve long-term flex lifespan.
Frequently Asked Questions
What motor and drive interfaces are supported by the Lenze EYP0010A0050M01A00 cable?
The cable features an industrial 12-pin female M23 circular connector on the motor end and a 9-pin male Sub-D connector on the drive end, designed for Lenze servo motors and servo drive evaluation modules.
Is the Lenze EYP0010A0050M01A00 cable suitable for continuous movement in drag chains?
Yes, this feedback cable is built with a high-flex outer jacket and dynamic internal construction rated for continuous flexing within automated drag chain energy carriers.
What is the length and shielding specification of this encoder cable?
The Lenze EYP0010A0050M01A00 system cable measures 5.0 meters in length and features complete metallic shielding to protect feedback signals against electromagnetic interference.
Does replacing the EYP0010A0050M01A00 cable require field wiring or pin assembly?
No, the cable is factory pre-assembled with pre-terminated M23 and Sub-D connectors, enabling direct plug-and-play installation without field soldering or crimping.
Take advantage of our exchange formula
A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.
Play it safe with our warranty conditions
Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.
Data backup and recovery
Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.
Specific firmware and hardware versions
If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.
Disclaimer:
We are not an authorised distributor of Lenze.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.