Lenze E82ZZ22234B210 8200 Vector 3-Phase EMC Mains Filter
Het item werd toegevoegd aan uw offerteaanvraag
Product Information
The Lenze E82ZZ22234B210 is a passive 3-phase mains EMC and RFI filter designed for use with Lenze 8200 Vector series frequency inverters. Operating across 3-phase AC power networks up to 500 V AC at 50/60 Hz, this filter is rated for a continuous operating current of 7.3 A. Its primary function is to suppress high-frequency electrical noise and mains interference generated by variable frequency drives, preventing harmful power line feedback from disturbing PLCs, sensors, and other sensitive electrical instrumentation inside the control cabinet.
Integrating the E82ZZ22234B210 into a control cabinet involves direct line wiring between the incoming 3-phase supply and the input terminals of the 8200 Vector frequency inverter. Mechanically, the filter features a versatile enclosure design supporting either direct footprint mounting underneath the drive unit or side mounting alongside it in the enclosure. As a passive noise filter, it requires no parameter settings, software configuration, firmware updates, or programming transfers. Replacing a unit simply requires verifying matching current and voltage ratings, isolating line power, and ensuring secure terminal connections and low-impedance ground bonding. Support from ABC Industrial Parts can assist maintenance teams in sourcing identical replacement hardware for legacy drive assemblies.
Because the E82ZZ22234B210 is a passive hardware component, it does not feature active diagnostic LEDs or fieldbus communications. Troubleshooting an installed filter focuses on practical electrical checks, including measuring phase-to-phase and phase-to-ground line voltages, inspecting physical wire connections for thermal discoloration, and verifying low resistance across protective grounding terminals. Phase unbalance, high noise leakage, or internal insulation breakdown cannot be repaired in the field. When internal electrical damage or insulation failure occurs, swapping the module for a tested replacement through ABC Industrial Parts provides the fastest path to restoring compliant, reliable motor control operation.
Technical Specifications
| Manufacturer | Lenze |
| Part Number | E82ZZ22234B210 |
| Component Type | EMC Mains Filter |
| Product Family | 8200 Vector |
| Maximum Supply Voltage | 500 V AC |
| Rated Current | 7.3 A |
| Phases | 3-Phase |
| Mains Frequency Range | 50 - 60 Hz |
| Mounting Style | Footprint / Side Mount |
Replacement and Spare Part Considerations
When replacing an EMC filter on a Lenze 8200 Vector drive system, verifying the exact current and voltage specifications is essential for proper operation and compliance. The E82ZZ22234B210 is specifically engineered for 3-phase systems operating up to 500 V AC with a maximum continuous current demand of 7.3 A. Substituting a filter with an incorrect current rating or lower voltage capacity can result in thermal stress, nuisance tripping, or inadequate high-frequency noise attenuation.
Installation layout should preserve the original mechanical footprint or side-mount orientation beneath or adjacent to the 8200 Vector frequency inverter. Correct installation requires maintaining short, low-impedance wiring runs between the filter output terminals and the drive input, as well as proper ground surface contact to ensure effective high-frequency noise suppression across the entire control panel.
Frequently Asked Questions
What is the primary function of the Lenze E82ZZ22234B210 filter?
The Lenze E82ZZ22234B210 is a passive 3-phase EMC mains filter that attenuates high-frequency noise and interference generated by 8200 Vector frequency inverters, protecting adjacent control components and ensuring compliance with EMC standards.
Which drive series is compatible with the E82ZZ22234B210?
This EMC filter is designed specifically for use with Lenze 8200 Vector series frequency inverters operating on 3-phase mains supplies up to 500 V AC at 7.3 A.
Does replacing the E82ZZ22234B210 require software or parameter setup?
No software setup or parameter configuration is required. The E82ZZ22234B210 is a passive electrical component that functions immediately upon correct mechanical mounting and wiring.
What mounting configurations are supported by this filter?
The filter enclosure supports versatile mechanical installation, including direct footprint mounting underneath the 8200 Vector drive or side mounting on the control cabinet panel.
Take advantage of our exchange formula
A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.
Play it safe with our warranty conditions
Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.
Data backup and recovery
Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.
Specific firmware and hardware versions
If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.
Disclaimer:
We are not an authorised distributor of Lenze.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.