Lenze E82ZZ55234B210 EMC RFI Filter 3.4A 500V
Het item werd toegevoegd aan uw offerteaanvraag
Product Information
The Lenze E82ZZ55234B210 is a 3-phase line-side EMC/RFI filter engineered to suppress high-frequency electrical noise in variable frequency drive systems. Designed specifically for the Lenze 8200 vector frequency inverter family, this passive filter reduces electrical interference fed back into the electrical grid to ensure compliance with EN 61800-3 electromagnetic compatibility standards. Operating on 3-phase AC networks rated between 320 V AC and 500 V AC (+10%) at 50/60 Hz, it delivers a continuous rated current of 3.4 A, matching drive frame sizes from 0.55 kW to 1.5 kW.
Integrating a replacement filter into an existing control cabinet relies on flexible physical mounting and straightforward power connections. The E82ZZ55234B210 supports sub-assembly footprint mounting directly beneath the 8200 vector drive chassis to save panel space, or standard side mounting on the enclosure backplane. Mains input and load connections are established via finger-safe IP20 screw terminals designated for L1, L2, L3, and PE connections. As a passive hardware component, the replacement unit requires no software, firmware alignment, or parameter transfer before putting it into service. ABC Industrial Parts can assist maintenance teams with verified replacement units when servicing legacy drive equipment.
Because the E82ZZ55234B210 is a passive electrical assembly without active diagnostic displays or status indicators, maintenance personnel must rely on electrical testing and physical inspection when troubleshooting system faults. First-line checks should confirm line phase continuity, check terminal screw connection integrity, and verify low-impedance earthing across the PE connection. Internal dielectric breakdown or severe transient line surges can damage internal filter components, leading to recurring line noise or upstream breaker trips. Internal component faults cannot be repaired in the field, making a tested replacement from ABC Industrial Parts the most efficient path to restoring compliance and operational reliability.
Technical Specifications
| Manufacturer | Lenze |
| Part Number | E82ZZ55234B210 |
| Component Type | EMC/RFI Filter |
| Product Family | 8200 vector |
| Rated Current | 3.4 A |
| Supply Voltage Range | 320 V AC - 500 V AC (+10%) |
| Mains Frequency | 50/60 Hz |
| Number of Phases | 3-Phase |
| Protection Rating | IP20 |
| Connection Type | Screw Terminals (L1, L2, L3, PE) |
| Mounting Type | Footprint Sub-Assembly or Side Mounting |
Replacement and Spare Part Considerations
When replacing a mains filter in a Lenze 8200 vector drive installation, confirm that the replacement unit matches the current rating of the drive module. The E82ZZ55234B210 provides a 3.4 A continuous current rating, which corresponds to 400 V to 500 V drive modules rated between 0.55 kW and 1.5 kW. Selecting an undersized filter may result in thermal overloading or premature filter failure.
Pay close attention to mechanical mounting and grounding during maintenance. The footprint mounting capability permits direct installation under the inverter chassis using shared panel space. Low-impedance earthing through the PE terminal must be secured to maintain effective high-frequency noise attenuation and comply with EN 61800-3 standards.
Frequently Asked Questions
What is the primary function of the Lenze E82ZZ55234B210 filter?
The E82ZZ55234B210 is a 3-phase line-side EMC/RFI filter that suppresses high-frequency radio interference generated by variable frequency drives, helping installations meet EN 61800-3 noise limits.
Which drive inverters are compatible with this filter?
This filter is designed for use with Lenze 8200 vector series frequency inverters in the 0.55 kW to 1.5 kW power range operating on 400 V to 500 V AC 3-phase supplies.
Does replacing the E82ZZ55234B210 require software configuration?
No. The filter is a passive electrical component and requires no software parameter setup, firmware transfer, or commissioning adjustments during installation.
How is the filter physically installed in a control cabinet?
It supports two installation methods: footprint sub-assembly mounting directly underneath the 8200 vector drive chassis to save enclosure space, or standard side mounting on the backplane.
What electrical connections does the filter use?
The unit features finger-safe IP20 screw terminals for connecting 3-phase mains lines (L1, L2, L3) and a protective earth (PE) grounding conductor.
Take advantage of our exchange formula
A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.
Play it safe with our warranty conditions
Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.
Data backup and recovery
Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.
Specific firmware and hardware versions
If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.
Disclaimer:
We are not an authorised distributor of Lenze.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.