Lenze 13010327 E82ZAFPC 8200 Series PROFIBUS Module
Het item werd toegevoegd aan uw offerteaanvraag
Product Information
The Lenze 13010327 E82ZAFPC is a PROFIBUS-DP fieldbus communication module engineered for integration with Lenze 8200 vector and 8200 motec frequency inverters. Operating within the Lenze 8200 Series ecosystem, this plug-in function module mounts directly into the internal Function Interface (FIF) slot of the host drive. Powered by an internal 5 V DC supply provided directly through the FIF slot interface, the module eliminates the need for external power wiring or additional mounting space within control cabinets, allowing direct real-time control, monitoring, and remote parameterization of the drive from central automation controllers.
Physical network integration is established using a standard 9-pin Sub-D female connector attached to a galvanically isolated RS-485 interface, which shields sensitive drive electronics against ground potential differences and line noise. Supporting both DP-V0 and DP-V1 fieldbus protocol standards, the unit features automatic baud rate detection from 9.6 kbit/s up to 12 Mbit/s to simplify network integration. When replacing an existing module, commissioning requires configuring the fieldbus station address using the integrated physical DIP switches or parameter settings via Lenze Global Drive Control (GDC) or L-force Engineer software. Ensuring proper master GSD file configuration and node address matching is essential for re-establishing communication, and ABC Industrial Parts can support technical teams with tested spare components for legacy drive systems.
Diagnostic information is available through on-board status LEDs and host drive parameter monitoring. The STAT LED illuminates solid green when internal module power is healthy and operational, while the BUS LED flashes or lights solid red to indicate bus communication errors, missing master cyclic connections, or offline conditions. System technicians can also query drive keypad status codes or evaluate GDC monitoring parameters C0885 and C0886 to diagnose bus issues. Communication fault codes such as CE0 signal a physical interface seating issue between the module and FIF slot, whereas CE1, CE2, and CE3 indicate process data transfer errors, parameter access faults, or watchdog timeouts. If physical seating and cable termination checks do not clear an internal hardware error, ABC Industrial Parts provides tested replacement units to restore machine operation.
Technical Specifications
| Manufacturer | Lenze |
| Part Number | 13010327 |
| Model / Type | E82ZAFPC |
| Component Type | Communication Module |
| Product Family | 8200 Series |
| Communication Interface | PROFIBUS-DP (DP-V0 / DP-V1) |
| Minimum Baud Rate | 9.6 kbit/s |
| Maximum Baud Rate | 12 Mbit/s |
| Bus Connector | 9-pin Sub-D female |
| Electrical Isolation | Galvanically isolated RS-485 interface |
| Supply Voltage | 5 V DC |
| Mounting Location | Function Interface (FIF) slot |
| Lifecycle Status | Discontinued |
Programming and Configuration
Lenze Global Drive Control (GDC) software and Lenze L-force Engineer provide the primary engineering environment for configuring the E82ZAFPC communication module and its host frequency inverter. Parameter settings can be read, written, and monitored over the fieldbus network or through a local drive interface. Key parameters such as C0885 and C0886 allow engineering teams to inspect fieldbus operational status and verify active communication configurations directly.
Setting up a replacement unit requires configuring the station address on the fieldbus network. Integrated physical DIP switches on the module board allow direct local address setting prior to installation, or the node address can be assigned via software parameters. The PROFIBUS master PLC program must be configured using the matching GSD file for the Lenze drive to align cyclic process data objects and acyclic parameter channels correctly.
Communication and System Integration
The Lenze E82ZAFPC function module provides high-speed PROFIBUS-DP connectivity for 8200 vector and 8200 motec frequency inverters. Equipped with a galvanically isolated RS-485 physical interface, the module connects via a standard 9-pin Sub-D female connector. The galvanic isolation protects internal drive control circuits from potential differences across distributed network nodes and reduces susceptibility to electrical noise in industrial environments.
Operating across the standard PROFIBUS DP spectrum, the module supports automatic baud rate detection from 9.6 kbit/s up to 12 Mbit/s, enabling seamless adaptation to existing fieldbus clock speeds without manual adjustment. Compliance with both DP-V0 cyclic data exchange and DP-V1 acyclic parameter services allows complete integration with standard PROFIBUS DP master controllers across conveyor systems, packaging machinery, and automated manufacturing lines.
Diagnostics and Status Indication
Comprehensive status tracking on the E82ZAFPC is achieved through dual front panel LEDs alongside drive-level diagnostic tools. The green STAT LED provides immediate visual indication of the module operational status and internal 5 V DC power supply. The red BUS LED indicates active fieldbus errors, an offline network state, or a loss of cyclic data transfer from the PROFIBUS master controller.
Further diagnostic depth is available through the host inverter keypad or monitoring tools in Lenze GDC software. Monitoring parameters C0885 and C0886 display active communication status and bus fault conditions. When errors occur on the host interface or fieldbus cable, standard drive diagnostic codes such as CE0 through CE3 isolate whether the issue stems from module insertion, process data interruptions, or watchdog timer expiration.
Status LED Indicators
| LED | Color/Status | Meaning |
|---|---|---|
| STAT | Green - Solid / Off | Solid Green indicates module operational and internal power supply OK. Off indicates no power or internal board power supply failure. |
| BUS | Red - Flashing / Solid Red | Flashing or Solid Red indicates bus error, offline state, or missing master cyclic connection. Continuous solid red despite valid network signals indicates internal hardware failure. |
Replacement and Spare Part Considerations
Although the Lenze 13010327 E82ZAFPC function module is discontinued, it remains critical for sustaining legacy 8200 vector and 8200 motec drive installations. Replacing a failed communication module requires verifying physical insertion into the host drive FIF slot while the drive is completely powered down.
When installing a replacement spare, maintenance personnel must set the node address via the onboard DIP switches to match the original unit's address. Additionally, network termination resistors at the ends of the PROFIBUS segment must be checked to prevent reflection errors. If a continuous solid red BUS LED or persistent CE0 error occurs after re-seating, replacing the module hardware is necessary to restore machine control.
Error Codes & Fault Codes
The following error codes may be displayed during operation or diagnostics:
| Code | Name | Description | Possible Cause | Recommended Action |
|---|---|---|---|---|
| CE0 | Communication Error (FIF / Module Interface) | Communication fault between host drive and E82ZAFPC function module. | Function module loose or incorrectly seated, defective internal connector interface, hardware fault on module. | Power off, remove and re-seat the module securely into the drive interface slot. If fault persists upon power-up, module hardware is damaged and requires replacement. |
| CE1 | Process Data Communication Error | Interruption of active PROFIBUS process data transfer. | PROFIBUS master in STOP state, disconnected bus cable, damaged fieldbus wiring, missing bus termination. | Verify master state, check bus connection, and verify line termination resistors at physical ends of the segment. |
| CE2 | Parameter Data Communication Fault | Error in parameter telegram transfer via PROFIBUS channel. | Invalid parameter index, transfer timeout, master formatting error. | Check PLC acyclic parameter access program blocks and GSD file parameters. |
| CE3 | PROFIBUS Watchdog Timeout | Bus watchdog monitoring timer expired without receiving a valid frame. | Network cable fault, excessive noise on RS-485 line, host controller cycle delay. | Check network cable shielding, grounding, and PLC cycle execution timing. |
Frequently Asked Questions
What drives are compatible with the Lenze E82ZAFPC communication module?
The E82ZAFPC (part number 13010327) is designed for direct plug-in installation into the Function Interface (FIF) slot of Lenze 8200 vector and Lenze 8200 motec series frequency inverters.
How do you set the PROFIBUS address on the Lenze E82ZAFPC?
The fieldbus station address can be configured directly using the integrated physical DIP switches located on the module, or programmed via software parameters using Lenze Global Drive Control (GDC) or L-force Engineer software.
Does the Lenze E82ZAFPC module require an external power supply?
No, the E82ZAFPC operates on an internal 5 V DC supply provided directly through the host drive FIF slot connection.
What does a solid red BUS LED indicate on the Lenze E82ZAFPC?
A solid red BUS LED indicates a bus error, offline state, or missing cyclic connection with the PROFIBUS master controller. If the red BUS LED remains solid red despite valid network signals, it points to an internal module hardware failure.
How do you resolve a CE0 fault code on a Lenze 8200 drive?
A CE0 fault indicates a communication error between the host drive and the E82ZAFPC module. Power off the drive, remove the module, and re-seat it securely in the FIF slot. If the fault persists after re-powering, the module hardware is damaged and requires replacement.
Take advantage of our exchange formula
A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.
Play it safe with our warranty conditions
Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.
Data backup and recovery
Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.
Specific firmware and hardware versions
If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.
Disclaimer:
We are not an authorised distributor of Lenze.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.