Lenze 13046044 E82ZAFCC201 – 8200 Vector CAN Bus Module
Het item werd toegevoegd aan uw offerteaanvraag
Product Information
The Lenze E82ZAFCC201, identified by part number 13046044, is a coated system bus function module engineered for Lenze 8200 Vector series frequency inverters. Operating as a plug-in option card, it installs directly into the standard option slot of the host inverter to provide advanced system bus communication and localized input expansion. Designed with conformal PCB coating, the unit protects internal electronics against moisture, atmospheric dust, and demanding manufacturing conditions typically found in material handling, packaging machinery, textile production, and automotive assembly lines.
For physical and network interfacing, the E82ZAFCC201 features an integrated Lenze System Bus (CAN) communication interface alongside two digital inputs connected via screw terminals. Putting a replacement module into service is efficient because drive parameter sets and configurations are stored non-volatilely within the host 8200 Vector inverter's EEPROM memory architecture. This direct hardware swap capability eliminates the need for manual re-parameterization, while complete system configuration and setup remain accessible via Lenze Global Drive Control (GDC) engineering software. ABC Industrial Parts can assist maintenance teams with supplying tested spare units to maintain seamless operational continuity.
Real-time diagnostic monitoring and communication status verification are handled through the host inverter interface and Lenze Global Drive Control (GDC) software. When troubleshooting system bus communication or input signal loss, initial field checks should focus on verifying secure screw terminal wiring, proper fieldbus connection, and correct module seating in the option slot. Internal board-level faults are not field-serviceable, making module replacement or acquiring a tested exchange unit through ABC Industrial Parts the quickest solution to bring connected motion drives back online.
Technical Specifications
| Manufacturer | Lenze |
| Part Number | 13046044 |
| Model/Type | E82ZAFCC201 |
| Product Family | 8200 Vector |
| Component Type | Communication Module |
| Communication Protocol | Lenze System Bus (CAN) |
| Digital Inputs | 2 |
| Connection Type | Screw Terminals |
| Mounting Location | Standard Option Slot |
| Conformal Coating | Yes |
Programming and Configuration
Configuration, setup, and parameter management for the E82ZAFCC201 module are conducted using Lenze Global Drive Control (GDC) engineering software. This software tool allows operators to manage system communication settings and monitor real-time drive responses directly through the host inverter interface.
All parameter sets and operating profiles are stored non-volatilely in the host 8200 Vector frequency inverter's EEPROM memory. Because the configuration is maintained on the drive itself, replacing a hardware module does not require uploading or manual parameter entry, enabling quick restoration of drive functionality.
Communication and System Integration
The E82ZAFCC201 incorporates a Lenze System Bus (CAN) interface designed for drive-to-drive networking and cross-linking across multi-axis motion systems. It connects 8200 Vector inverters into high-speed fieldbus control networks for synchronized machinery operation.
In addition to network communication, the module adds two onboard digital control inputs terminated via screw terminals. This allows physical field device signals to be integrated directly into the host drive without requiring external I/O hardware.
Diagnostics and Status Indication
Diagnostic monitoring for the E82ZAFCC201 is performed via the host inverter and Lenze Global Drive Control (GDC) engineering software. Operational states and system bus communication status are displayed directly within the software environment during active communication.
Replacement and Spare Part Considerations
When replacing an E82ZAFCC201 module (part number 13046044), ensure the unit is installed firmly into the standard option slot of a Lenze 8200 Vector frequency inverter. Screw terminal wiring for the digital inputs and system bus cables must be securely reattached.
Since configuration parameters are stored inside the inverter's internal EEPROM, a direct hardware replacement restores full system bus communication and digital input functionality without needing software configuration re-loads.
Frequently Asked Questions
What is the primary function of the Lenze E82ZAFCC201 function module?
The Lenze E82ZAFCC201 (part number 13046044) provides Lenze System Bus (CAN) communication and two digital inputs via screw terminals for Lenze 8200 Vector frequency inverters.
Which drive series is compatible with the E82ZAFCC201 module?
The module is designed specifically for installation into the standard option slot of Lenze 8200 Vector series frequency inverters.
Do I need to reconfigure parameter settings when installing a replacement module?
No, parameter sets and configurations are saved non-volatilely in the host inverter's EEPROM memory, allowing direct hardware swaps without manual re-parameterization.
Which software tool is used for diagnostics and setup?
System setup, parameterization, and diagnostic monitoring are supported using Lenze Global Drive Control (GDC) engineering software.
What environmental protection features are included on this module?
The PCB features conformal coating to protect sensitive electronic components against dust, humidity, and challenging atmospheric conditions.
Take advantage of our exchange formula
A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.
Play it safe with our warranty conditions
Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.
Data backup and recovery
Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.
Specific firmware and hardware versions
If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.
Disclaimer:
We are not an authorised distributor of Lenze.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.