Lenze 13549125 MCA19S35-RV0F2-RS0 Servo Motor
Het item werd toegevoegd aan uw offerteaanvraag
Product Information
The Lenze MCA19S35-RV0F2-RS0 (material number 13549125) is a high-dynamic compact asynchronous servo motor from the Lenze MCA series, designed for demanding motion control tasks in industrial machinery. Built in frame size 19, this unit operates at a rated speed of 3500 RPM with a rated output power of 13.5 kW, a rated current of 33 A, and a rated frequency of 121.7 Hz. To sustain continuous high output without thermal derating, it is equipped with forced ventilation cooling, allowing a continuous torque delivery of 37 Nm and a peak torque capacity up to 115 Nm. The physical construction incorporates a standard DIN 6885 keyway drive shaft and an integrated 24V DC spring-applied holding brake supplying 40 Nm of retention torque for secure load locking.
Connecting the MCA19S35-RV0F2-RS0 into drive systems relies on SpeedTec heavy-duty circular connectors for simplified, vibration-proof power and signal termination. Position feedback is provided via an integrated 2-pole resolver (RS0 option), communicating directly with compatible drive controllers such as the Lenze 9400, i700, and TopLine servo drive series. Placing a replacement motor into service requires loading matching motor parameters into the drive controller using Lenze EASY engineering tools, aligning resolver feedback settings, and verifying 24V brake control line wiring. ABC Industrial Parts can assist in sourcing verified replacement units and supplying matching hardware configurations to minimize machine downtime.
System state and thermal health are monitored using an integrated KTY / PT1000 thermal sensor embedded directly in the stator winding, which is evaluated continuously by the connected Lenze drive inverter. Practical first-line field checks include measuring winding thermal resistance, confirming proper locking of SpeedTec power and feedback cabling, checking 24V DC brake release power, and verifying unobstructed airflow from the forced ventilation fan. Internal stator winding shorts, electrical insulation breakdown, or mechanical bearing failure cannot be repaired on-site; when board-level or internal motor faults occur, sourcing a fully tested exchange unit from ABC Industrial Parts offers a dependable path back to full production.
Technical Specifications
| Manufacturer | Lenze |
| Part Number | 13549125 |
| Model / Type | MCA19S35-RV0F2-RS0 |
| Product Family | MCA Compact Servo Motors |
| Component Type | Servo Motor |
| Frame Size | 19 |
| Rated Speed | 3500 rpm |
| Rated Output Power | 13.5 kW |
| Rated Continuous Torque | 37 Nm |
| Peak Torque | 115 Nm |
| Rated Current | 33 A |
| Rated Frequency | 121.7 Hz |
| Holding Brake Torque | 40 Nm |
| Cooling Method | Forced Ventilation |
| Shaft Type | Keyway (DIN 6885) |
| Feedback System | 2-Pole Resolver (RS0) |
| Connection Type | SpeedTec Circular Connector |
Programming and Configuration
Parameterization for the Lenze MCA19S35-RV0F2-RS0 is managed through Lenze EASY engineering tools when integrated with Lenze servo drives such as the 9400, i700, or TopLine series. The drive must be configured with motor data corresponding to part number 13549125, including electrical ratings of 33 A current and 121.7 Hz rated frequency, pole configuration, and resolver offset settings.
When commissioning a replacement motor, drive parameter sets must be uploaded or loaded from existing project backups. Correct configuration of the 24V DC holding brake control parameters and thermal evaluation functions for the internal KTY/PT1000 winding sensor ensures safe mechanical holding and reliable thermal motor protection under dynamic operating conditions.
Communication and System Integration
The Lenze MCA19S35-RV0F2-RS0 utilizes SpeedTec heavy-duty circular connectors for simplified electrical and feedback installation. These quick-locking connectors ensure vibration-resistant, tool-free coupling for power cables and resolver feedback lines in high-dynamic applications such as packaging machinery axes, continuous web tensioning, and heavy-duty material handling drives.
Position feedback and speed control are communicated through an integrated 2-pole resolver (RS0 option). The resolver signal is processed directly by connected Lenze drive controllers, facilitating precise closed-loop vector control, accurate speed feedback at 3500 RPM, and synchronized motion across multi-axis machine configurations.
Diagnostics and Status Indication
Primary thermal diagnostics for the Lenze MCA19S35-RV0F2-RS0 are provided by an integrated KTY / PT1000 thermal sensor embedded within the stator winding. The connected Lenze drive inverter continuously evaluates temperature data from this sensor to monitor winding thermal load and trigger over-temperature alerts or drive cut-offs during high-torque operation.
Diagnostic checks for the motor focus on signal continuity at the SpeedTec connectors, power supply voltage to the 24V DC holding brake, and verification of forced ventilation airflow. Fault conditions reported at the drive display or software diagnostic tools typically direct technicians to verify forced cooling fan operation or thermal sensor loop continuity.
Replacement and Spare Part Considerations
Replacing an installed Lenze MCA19S35-RV0F2-RS0 (13549125) requires verifying complete physical and electrical compatibility. Key parameters that must match include the frame size 19 dimensions, the DIN 6885 keyway shaft, the 13.5 kW power rating, 37 Nm continuous torque capability, and forced ventilation cooling setup.
Care must be taken to ensure the replacement unit matches the feedback type (2-pole resolver, RS0 option) and incorporates the 24V DC spring-applied holding brake rated for 40 Nm. Recommissioning requires verifying SpeedTec connection pinouts, running drive-guided resolver identification or alignment routines if needed, and confirming thermal sensor parameters in the drive software.
Frequently Asked Questions
What drive controllers are compatible with the Lenze MCA19S35-RV0F2-RS0 servo motor?
The motor is compatible with Lenze Servo Drives 9400, i700, and TopLine series using standard Lenze EASY engineering software tools for drive parameterization.
What feedback system is built into the MCA19S35-RV0F2-RS0 motor?
The motor features an integrated 2-pole resolver (RS0 option) connected via SpeedTec circular connectors for position and speed feedback to the drive inverter.
How is thermal protection managed in this Lenze MCA servo motor?
Thermal monitoring is handled via an integrated KTY / PT1000 thermal sensor in the stator winding, which is evaluated continuously by the connected Lenze drive inverter.
What are the cooling and holding brake specifications for part number 13549125?
The motor features forced ventilation cooling to deliver up to 37 Nm of continuous torque, alongside an integrated 24V DC spring-applied holding brake providing 40 Nm of retention torque.
What steps are required when replacing a failed MCA19S35-RV0F2-RS0 motor?
Technicians should verify mechanical keyway coupling, connect SpeedTec power and signal plugs, ensure forced cooling airflow, and confirm that the drive inverter's motor parameters and resolver alignment settings match part number 13549125.
Take advantage of our exchange formula
A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.
Play it safe with our warranty conditions
Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.
Data backup and recovery
Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.
Specific firmware and hardware versions
If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.
Disclaimer:
We are not an authorised distributor of Lenze.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.